v “PS Menu” on page 90
v “Coaxial Setup Menu” on page 118
v “Twinax Setup Menu” on page 121
v “IPDS Menu” on page 92
8. Consider replacing the fuser. See “Changing the Usage Kit” on page 133.
Print Is Too Light
Possible Causes
Actions You Should Take
Print Sample
Economy mode is set on.
Make sure economy mode is not set.
Check your print driver settings and
also see “Configuration (Config)
Menu” on page 83.
Density is set too low.
Reset it to a higher value if
necessary. See “Configuration
(Config) Menu” on page 83.
There is moisture in the
paper.
Load fresh, dry paper.
The toner cartridge is low
on toner.
Replace the toner cartridge. See
“Changing the Toner Cartridge” on
page 130.
The toner cartridge is
damaged.
Replace the toner cartridge. See
“Changing the Toner Cartridge” on
page 130.
Toner Spots on the Print
Possible Causes.
Actions You Should Take
Print Sample
Paper does not meet
specification.
Use recommended paper. See
“Selecting Paper and Other
Printable Material” on page 31.
The toner cartridge is
damaged.
Replace the toner cartridge. See
“Changing the Toner Cartridge” on
page 130.
198 Infoprint 21: User’s Guide
