Chapter 2. Installing Your Printer
Quick Setup Poster
To set up your printer, see Quick Setup Poster, which is shipped with the
printer. Use this checklist as a supplement to Quick Setup Poster.
Installation Checklist
__ 1. Unpack your printer. See “Unpacking and Setting Up the Printer” on
page 12.
__ 2. Load the paper tray shipped with your printer. See:
v Quick Setup Poster
v “Loading Paper and Envelopes into the Printer” on page 37.
__ 3. Install the toner cartridge. See:
v Quick Setup Poster
v “Changing the Toner Cartridge” on page 130.
__ 4. Apply the operator panel overlay (if it has not already been applied to
the operator panel). See “Applying the Operator Panel Overlay” on
page 13.
__ 5. Power on the printer. See “Powering On the Printer” on page 15.
__ 6. Select a language for messages and menus (the default is English). See
“Selecting a Language” on page 16.
__ 7. Print the printer configuration page to verify the printer works. See
“Printing the Printer Configuration Page” on page 24.
__ 8. Install other options, such as extra paper trays, the Offset Output Bin,
extra memory, the IBM AFP/IPDS Module, the Resource Flash
Memory Module, and the hard drive. See “Chapter 8. Installing
Optional Printer Features” on page 145.
Note: Various options may have unique memory requirements. For
information, see “Memory Requirements” on page 6.
__ 9. Connect a parallel cable (if desired). See “Connecting the Parallel
Cable” on page 17.
__ 10. Optionally, attach the printer to a network or other system
configuration using one of these cards:
v IBM Infoprint Ethernet 10/100 PCI Adapter
v IBM Infoprint Token Ring 4/16 PCI Adapter
© Copyright IBM Corp. 2000
11
