v  IBM Twinax SCS Interface Card
v  IBM Coax SCS Interface Card See “Installing a Network Interface Card” on page 155.              A system or network administrator should review the documentation
             shipped with the network interface card to configure the printer and
             your computing environment correctly. Ethernet and Token Ring
             Configuration Guide is shipped with the Ethernet and token-ring
             network interface cards. Twinax/Coax Configuration Guide is shipped
             with the Twinax and Coax network interface cards.
__ 11.   Install printer drivers and configure your host environment. See              “Installing Printer Drivers” on page 19.
__ 12.   Get familiar with your printer. See “Chapter 3. Using the Operator Panel” on page 21. Unpacking and Setting Up the Printer Before you install your printer, make sure you have a place large enough to
put it. Without any of its optional features attached, the printer dimensions
are:
v  Width: 16.6 inches (422 mm)
v  Depth: 17.3 inches (439 mm)
v  Height: 16.3 inches (413 mm) With two additional paper drawers, the printer dimensions are:
v  Width: 16.6 inches (422 mm)
v  Depth: 17.3 inches (439 mm)
v  Height: 33.9 inches (863 mm) In addition, make sure you leave enough room around the printer to access
and operate it. CAUTION: <2-41>  The printer weighs approximately 28 kg (62 lb). Use two persons to carry the printer. Use appropriate lifting precautions. Remove all items from the packing box including packaging pieces. Lift the
printer and place it on a flat surface. If any of the following items are missing,
contact your point of purchase:
v  Infoprint 21 12    Infoprint 21: User’s Guide