NETBIOS Menu
Important!
For information about configuring the Ethernet or token-ring cards,
please see Ethernet and Token Ring Configuration Guide, which comes with
the network interface cards.
Use the NETBIOS Menu to configure NetBIOS communications to your
printer. The following table describes the settings you can change from the
NETBIOS MENU. An asterisk (*) next to a value in the table indicates the
factory default. The NETBIOS MENU appears only if you have an Ethernet or
token-ring card installed and you set the NETBIOS item ON on the Network
Menu.
Notes:
1. To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that is now active.
2. If you are unfamiliar with using the operator panel to work with menus,
please read “Using the Operator Panel Keys” on page 22 and “Navigating
Menus” on page 23 before continuing.
NETBIOS MENU
Item
Value
Description
PERSONALTY
AUTO*
PCL
PS
Specifies how the printer treats jobs it receives over the
NetBIOS interface:
v AUTO—the printer examines the data stream and
handles it accordingly.
v PCL—the printer treats all data streams as PCL.
v PS—the printer treats all data streams as PostScript.
108 Infoprint 21: User’s Guide
