NetWare Menu
Important!
For information about configuring the Ethernet or Token Ring interfaces,
please see Ethernet and Token Ring Configuration Guide, which comes with
the network interface cards.
Use the NetWare Menu to configure NetWare communications to your printer.
The following table describes the settings you can change from the NetWare
Menu. An asterisk (*) next to a value in the table indicates the factory default.
The NetWare Menu appears only if you have an Ethernet or Token Ring card
installed and you set the NETWARE item ON on the Network Menu.
Notes:
1. To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that is now active.
2. If you are unfamiliar with using the operator panel to work with menus,
please read “Using the Operator Panel Keys” on page 22 and “Navigating
Menus” on page 23 before continuing.
NetWare Menu
Item
Value
Description
PERSONALTY
AUTO*
PCL
PS
Specifies how the printer treats jobs it receives over the
NetWare interface:
v AUTO—the printer examines the data stream and
handles it accordingly.
v PCL—the printer treats all data streams as PCL.
v PS—the printer treats all data streams as PostScript.
802.3
ON*
OFF
Enables or disables 802.3 (Ethernet Standard Version 2)
frame types. This item applies only to Ethernet interfaces.
v ON—enables 802.3 frame types.
v OFF—disables 802.3 frame types.
ETHER II
ON*
OFF
Enables or disables ETHER II (Ethernet Standard Version 2)
frame types. This item applies only to Ethernet interfaces.
v ON—enables ETHER II frame types.
v OFF—disables ETHER II frame types.
802.2
ON*
OFF
Enables or disables 802.2 frame types.
v ON—enables 802.2 frame types.
v OFF—disables 802.2 frame types.
106 Infoprint 21: User’s Guide
