TCP/IP Menu
Important!
For information about configuring the Ethernet or token-ring interfaces,
please see Ethernet and Token Ring Configuration Guide, which comes with
the network interface cards.
Use the TCP/IP Menu to configure TCP/IP communications to your printer.
The following table describes the settings you can change from the TCP/IP
Menu. An asterisk (*) next to a value in the table indicates the factory default.
The TCP/IP Menu appears only if you have an Ethernet or token-ring card
installed.
Notes:
1. To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that is now active.
2. If you are unfamiliar with using the operator panel to work with menus,
please read “Using the Operator Panel Keys” on page 22 and “Navigating
Menus” on page 23 before continuing.
TCP/IP Menu Item
Value
Description
IP ADDRESS
nnn.nnn.nnn.nnn
Specifies the printer’s IP address. Consult your network or
LAN administrator before changing this value. See
“Chapter 9. Configuring Printer Network Addresses” on
page 185 for more information.
SUBNET MASK
nnn.nnn.nnn.nnn
Specifies the printer’s subnet mask. Consult your network
or LAN administrator before changing this value. See
“Chapter 9. Configuring Printer Network Addresses” on
page 185 for more information.
GATEWAY
ADDRESS
nnn.nnn.nnn.nnn
Specifies the IP address of the default gateway. Consult
your network or LAN administrator before changing this
value. See “Chapter 9. Configuring Printer Network
Addresses” on page 185 for more information.
104 Infoprint 21: User’s Guide
