Network Menu
Item
Value
Description
SPEED (Ethernet)
AUTO
10 SMPLX
10 DUPLX
100 SMPLX
100 DUPLX
Sets the speed of the Ethernet 10/100 PCI Adapter.
v AUTO—the speed is detected automatically. This is the
default. Note that some network switches may not detect
the speed correctly, and may report the wrong speed. In
these cases you would need to set it to 10 or 100.
v 10 SMPLX—sets the speed to 10BaseT simplex (half
duplex)
v 10 DUPLX—sets the speed to 10BaseT full duplex
v 100 SMPLX—sets the speed to 100BaseTx simplex
(half-duplex)
v 100 DUPLX—sets the speed to 100BaseTx full duplex
SPEED (Token
Ring)
AUTO
4 MBPS
16 MBPS
Sets the speed of the Token Ring 4/16 PCI Adapter.
v AUTO—the speed is detected automatically. This is the
default. Note that some network switches may not detect
the speed correctly, and may report the wrong speed. In
these cases you would need to set it to 4 MBPS or 16
MBPS.
v 4 MBPS—sets the speed to 4Mbps
v 16 MBPS—sets the speed to 16Mbps
LAA ADDRESS
nn.nn.nn.nn.nn.nn
Specifies the locally administered address (LAA) of the
printer.
Notes:
1. Resetting the printer to factory defaults sets the LAA
back to the MAC address. Each LAA must be unique, so
make sure to consult your network or LAN
administrator before changing this value.
2. Also note that this value appears only when a
token-ring card is installed.
See “Setting the Locally Administered MAC Address
(LAA)” on page 186 for more information.
Chapter 6. Operator Panel Menus
103
