ON 20040203@2:42:49 PM at page:
http://techref.massmind.orgio/steppers.htm#38020.2267939815
James Newton[38020.2267939815] Published and replied to post 38020.2267939815 by matejbincl

|Insert 'For most common 5-wire unipolar motors; 
<P><UL>
<LI>find common "centre tap" using an ohmmeter 
<LI>common goes to M+ power 
<LI>other 4 wires are the phases 
</UL>
With 6-wire unipolar motors; 
<UL>
<LI>find the 2 common wires 
<LI>connect these together 
<LI>connect commons to M+ power 
<LI>other 4 wires are the phases 
</UL>
Hook up the controller A+, A-, B+, and B- terminals to the phase leads (guess at the phases) and try to step slowly.
<P>
If the motor does not turn, try swapping one A wire with one B wire, you may have connected the motor phasing wrong. If you have the phasing wrong, the motor will tend to sit there and "wobble" or "buzz".
<P>
If the motor turns, but in the wrong direction, you only need to swap the two A wires with each other.
<P>As for other information, try google.com for the part numbers.' at: '<!-- 38020.2267939815 EOR -->'

<A TITLE="P-217.72.92.66" NAME="38020.2267939815" HREF="mailto:matejbincl@hotmail.com">matejbincl@hotmail.com</A> asks: <BLOCKQUOTE><A NAME="217.72.92.66" HREF="/techref/io/steppers.htm" TARGET="_top">
/techref/io/steppers.htm</A> 
Hello i have the stepp motor number IBM P/N 1325059,<BR>
and another number 23LQ-C302-G1V, MINEBEA CO:., LTD<BR>
and i want to knew which wire is for + and -  and remote?<BR>
and how many voltage can i put on at:::? </BLOCKQUOTE>

|Delete 'P-' before: '<!-- 38020.2267939815 EOR -->' but after: '<A TITLE="'.