ON 20061213@5:10:41 PM at page:
http://massmind.org/techref/ti/msp430/index.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://massmind.org/techref/diff.asp?url=H:\techref\ti\msp430\index.htm&version=47



ON 20061213@5:16:00 PM at page:
http://massmind.org/techref/ti/msp430/gotchas.htm#39064.7194444444
James Newton[JMN-EFP-786] See also:
http://www.msp430.info/modules.php?name=Sections&op=viewarticle&artid=2
"Using and setting up the UART modulation register" In low power / low clock frequency applications, the TX and RX modulation values might be different.



ON 20061213@5:16:58 PM at page:
http://massmind.org/techref/ti/msp430/index.htm#39064.7201157407
James Newton[JMN-EFP-786] Says
in a new file at:
http://massmind.org/techref/ti/msp430/usarts.htm
USART setup



ON 20061213@5:17:50 PM at page:
http://massmind.org/techref/ti/msp430/usarts.htm#39064.7207175926
James Newton[JMN-EFP-786] See also:
http://www.elo.utfsm.cl/~lsb/elo311/labs/msp/MSP430_Praktikum/Assembler/projects/Project_7_(UART_RS232)/uart02_19200.s43
Assembly code that cal's RC based DCO via 32K xtal to get 19.2k baud RX w TX echo.+



ON 20061213@5:18:17 PM at page:
http://massmind.org/techref/ti/msp430/usarts.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://massmind.org/techref/diff.asp?url=H:\techref\ti\msp430\usarts.htm&version=1



ON 20061213@5:19:55 PM at page:
http://massmind.org/techref/ti/msp430/usarts.htm#39064.7221643519
James Newton[JMN-EFP-786] See also:
http://www.msp430.info/modules.php?name=Sections&op=viewarticle&artid=2
"Using and setting up the UART modulation register" In low power / low clock frequency applications, the TX and RX modulation values might be different.+



ON 20061213@5:21:14 PM at page:
http://massmind.org/techref/ti/msp430/usarts.htm#39064.7230787037
James Newton[JMN-EFP-786] See also:
http://mspgcc.sourceforge.net/baudrate.html
Baudrate Calculator