© 1999 Scenix Semiconductor, Inc. All rights reserved. - 11 - www.scenix.com SX18AC  / SX20AC / SX28AC 4.3 OPTIONRegister When the OPTIONX bit in the FUSE word is cleared, bits
7  and  6  of  the  OPTION  register  function  as  described
below.
When   the   OPTIONX   bit   is   set,   bits   7   and   6   of   the
OPTION register read as ‘1’s. Upon reset, all bits in the OPTION register are set to 1. RTW RTE _IE RTS RTE
_ES PSA PS2 PS1 PS0 Bit 7 Bit 0 RTW RTCC/W register selection:
0 = Register 01h addresses W
1 = Register 01h addresses RTCC RTE_IE RTCC edge interrupt enable:
0 = RTCC roll-over interrupt is enabled
1 = RTCC roll-over interrupt is disabled RTS RTCC increment select:
0 = RTCC increments on internal instruction
cycle
1 = RTCC increments upon transition on
RTCC pin RTE_ES RTCC edge select:
0 = RTCC increments on low-to-high transi-
tions
1 = RTCC increments on high-to-low transi-
tions PSA Prescaler Assignment:
0 = Prescaler is assigned to RTCC, with di-
vide rate determined by PS0-PS2 bits
1 = Prescaler is assigned to WDT, and divide
rate on RTCC is 1:1 PS2-PS0 Prescaler divider (see Table 4-2) Table 4-2.  Prescaler Divider Ratios PS2, PS1, PS0       RTCC
Divide Rate Watchdog Timer Divide Rate 000 1:2 1:1 001 1:4 1:2 010 1:8 1:4 011 1:16 1:8 100 1:32 1:16 101 1:64 1:32 110 1:128 1:64 111 1:256 1:128