IP2022 Data Sheet www.ubicom.com 101 7.1.24    TxCFG2L Register Timer 1 and 2 configuration. 7 6 5 4 3 2 1 0 Name Description TOUTSET Override bit to set the TxOUT output.
This bit always reads as zero. 0 =   Writing 0 to this bit has no effect 1 =   Writing 1 to this bit forces the TxOUT signal high TOUTCLR Override bit to clear the TxOUT output.
This bit always reads as zero. 0 =   Writing 0 to this bit has no effect 1 =   Writing 1 to this bit forces the TxOUT signal low CPI2CPI1 Internally connect the TxCPI2 input to
the TxCPI1 input. This makes the
TxCPI2 port pin available for general-
purpose I/O. 0 =   No internal connection between TxCPI1 and TxCPI2 1 =   TxCPI1 and TxCPI2 internally connected CPI2EDG1:0   TxCPI2 edge sensitivity select 00 =   Falling edge on TXCPI2 rec- ognized as capture 2 event 01 =   Rising edge on TXCPI2 rec- ognized as capture 2 event 10 =   Any falling or rising edge on TXCPI2 recognized as cap-
ture 2 event 11 =   Any falling or rising edge on TXCPI2 recognized as cap-
ture 2 event CPI1EDG1:0   TxCPI1 edge sensitivity select 00 =   Falling edge on TXCPI1 rec- ognized as capture 1 event 01 =   Rising edge on TXCPI1 rec- ognized as capture 1 event 10 =   Any falling or rising edge on TXCPI1 recognized as cap-
ture 1 event 11 =   Any falling or rising edge on TXCPI1 recognized as cap-
ture 1 event Name Description