IP2022 User’s Manual—Peripherals www.ubicom.com 285 4.6.11    SxINTE Register The SxINTE register has the same format as the SxINTF register.
For  each  condition  indicated  by  a  flag  in  the  SxINTF  register,
setting the corresponding bit in the SxINTE register enables the
interrupt for that condition. Figure 4-10 shows the interrupt logic
for the two SERDES units. RXXCRS In 10Base-T mode, set if signal energy is detected but no
link pulse is detected 0 =    No signal energy without link pulse has been           detected since this bit was last cleared
1 =    Signal energy without a link pulse has been detected Name Description