IP2022 User’s Manual—Peripherals www.ubicom.com 263 TOUTSET Override bit to set the TxOUT output. This bit always reads
as zero. 0 =    Writing 0 to this bit has no effect
1 =    Writing 1 to this bit forces the TxOUT signal high TOUTCLR Override bit to clear the TxOUT output. This bit always reads
as zero. 0 =    Writing 0 to this bit has no effect
1 =    Writing 1 to this bit forces the TxOUT signal low CPI2CPI1 Internally connect the TxCPI2 input to the TxCPI1 input. This
makes the TxCPI2 port pin available for general-purpose I/O. 0 =    No internal connection between TxCPI1 and           TxCPI2
1 =    TxCPI1 and TxCPI2 internally connected CPI2EDG1:0    TxCPI2 edge sensitivity select 00 =    Falling edge on TXCPI2 recognized as capture 2             event
01 =    Rising edge on TXCPI2 recognized as capture 2             event
10 =    Any falling or rising edge on TXCPI2 recognized             as capture 2 event
11 =   Any falling or rising edge on TXCPI2 recognized as capture 2 event Name Description