Twinax SCS Menu Use the Twinax SCS Menu to define how the printer handles SCS data over the twinax
attachment.   The following table describes the settings you can change from the Twinax
SCS Menu.   An asterisk (*) next to a value in the table indicates the factory default.
The Twinax SCS Menu appears only if you have the twinax attachment installed. Notes: 1.   To select a new value, press the Continue/Enter key when the value is displayed in the message display area.   An asterisk (*) appears next to the value in the
message display area, indicating that it is now active. 2.   Values set in print jobs (either by the print application or the printer driver) override Twinax SCS Menu values set at the printer. 3.   For more information about configuring the twinax attachment, see IBM Network Printers: Twinax/Coax Configuration Guide. 4.   If you are unfamiliar with using the operator panel to work with menus, please read “Using the Operator Panel Keys” on page  10 and “Navigating Menus” on page  12
before continuing. TWINAX SCS MENU ITEM VALUE Description TRAY1
TRAY2
AUX COR*
PORT
LAND
C-PORT Specifies the default orientation for jobs printed from each tray
listed on the menu.   TRAY1 is the standard 250-sheet input tray.
TRAY2 is the optional 500-sheet input tray; if you do not install it,
it will not be in the list.   AUX is the flip-down tray in the front of
the printer.   Each input can be assigned one of the following
default orientations Ÿ   COR—computer output reduction:   Printing in landscape with       the logical page reduced to fit more data on the physical
      page.   The printer reduces vertical spacing and uses a
      smaller font with less space between letters.
Ÿ   PORT—portrait:   the page has normal, upright business letter       orientation.
Ÿ   LAND—landscape: the page is wider than long.
Ÿ   C-PORT—compressed portrait:   printing in portrait, but with spaces reduced between characters (horizontal compression)
so that more text fits on a line.   This allows more characters
per line. LPI 0
3
4
6*
8 Specifies a default lines per inch value.   0 specifies either the
value specified in the job, or the PCL default value for the printer. CPI nn Specifies the default characters per inch, or pitch.   nn can be 5,
10, 12, 15, 17.1, 20, or 27.   The default is 10. 76 User’s Guide