Test Menu Use the Test Menu to display basic information about the printer and to perform basic
troubleshooting tasks. Notes: 1.   To perform the action associated with the menu item you select, press the Continue/Enter key. 2.   The actual menu items you see depend on what options you have installed.   To find out what options you have installed, print a printer configuration page.   See
“Printing the Printer Configuration Page” on page  13. 3.   If you are unfamiliar with using the operator panel to work with menus, please read “Using the Operator Panel Keys” on page  10 and “Navigating Menus” on page  12
before continuing. 4.   If IPDS is the active data stream when the printer is taken offline, the following Test Menu items will not be available: Ÿ    CONFIG PAGE
Ÿ    PRINT PS FONTS
Ÿ    PRINT PCL FONTS
Ÿ    PRINT PS DEMO
Ÿ    PRINT SCS CHARS These items reappear after a port timeout occurs (the length of the timeout
depends on the host or network attachment you use); they also reappear if you
power off the printer, wait ten seconds, and then power on. TEST MENU ITEM Description CONFIG PAGE Prints the printer configuration page.   See “Printing the Printer Configuration Page”
on page  13 for more information. PRINT PS FONTS Prints a list of PostScript fonts installed on the printer.   See “Printing a List of
PostScript Fonts” on page  17 for more information. PRINT PCL FONTS Prints a list of PCL5e fonts installed on the printer.   See “Printing a List of PCL5e
Fonts” on page  17 for more information. PRINT PS DEMO Prints the PostScript demo page. CONTINUOUS TEST Prints continuous test pages.   To stop the test, press the Cancel Print key. RESET PRINTER Cancels the current print job. PRINT IPDS FONTS Prints a list of resident IPDS fonts installed on the printer. PRINT SCS
CHARACTERS Prints the SCS code page (character set). Chapter 5.   Operator Panel Menus 55