Appendix D.   Print Quality Problems Print Is Too Light Possible Causes Actions You Should Take Print Sample Economy mode is set on Make sure economy mode is not set.
See “Configuration (Config) Menu” on
page  60. Density is set too low Make sure that the density is not set
to a value less than 2.   Reset it to a
higher value if necessary.   See
“Configuration (Config) Menu” on
page  60. There is moisture in the
paper Load fresh, dry paper The toner cartridge is low
on toner Replace the toner cartridge with a
new one The toner cartridge is
damaged Replace the toner cartridge with a
new one Toner Spots on the Print Possible Causes Actions You Should Take Print Sample Paper does not meet
specification Use recommended paper The toner cartridge is
damaged Replace the toner cartridge with a
new one Copyright IBM Corp. 1996, 1997 179