Chapter 7.   Installing Printer Options This chapter describes how to install and remove the following options: Ÿ    The SIMM and hard drive (see page 98)
Ÿ    The Network Interface Card (see page 110)
Ÿ    The duplex unit (see page 114)
Ÿ    The 500-sheet paper tray (see page 125)
Ÿ    The face-up output bin (see page 138)
Ÿ    The envelope tray (see page 141) Important To verify that an option is installed correctly, print the configuration page.   See
“Printing the Printer Configuration Page” on page  13.   Also, make sure you update
your printer driver to indicate the new feature is installed. Handling Static Sensitive Devices When you handle options and other computer components, take these precautions: Ÿ    Limit your movement.   Movement can cause static electricity to build up around       you.
Ÿ    Always handle components carefully.   Handle adapters and memory-module kits by       the edges.   Never touch any exposed circuitry.
Ÿ    When you are installing a new option, touch the static-protective package       containing the option to the mounting bracket on the controller card for at least two
      seconds.   This reduces static electricity from the package and from your body.
Ÿ    When possible, remove the option and install it directly in the controller without       setting the option down.   When this is not possible, place the static-protective
      package that the option came in on a smooth, level surface and place the option
      on it.
Ÿ    Do not place the option on the printer cover or other metal surface. Copyright IBM Corp. 1996, 1997 97