3. Press the Value + or Value - key until you see the input tray you want to
use as the default.
4. Press the Enter key to select the new tray. An asterisk appears next to the
value, showing that it is active.
5. To exit menu mode, press the Online key.
Note: Values specified in your print jobs override defaults set at the printer.
For example, if a print job requests Tray 1, the printer will use Tray 1,
even if the default tray is set to something else.
Selecting the Default Output Bin
Situation: You have installed the Offset Output Bin and you want to make it
the default output bin.
Action:
1. Press the Menu key until you see PAPER MENU in the display.
2. Press the Item key until you see OUTPUT=output* in the display, where
output is the current default.
3. Press the Value + or Value - key until you see the value you want. If you
have the Offset Output Bin installed, you can select one of the following
values:
v MAIN is the paper exit area.
v OFFSET is the Offset Output Bin.
4. Press the Enter key to select the new bin. An asterisk appears next to the
value, showing that it is active.
5. To exit menu mode, press the Online key.
Notes:
1. If the Face-up Output Bin is not open, output bin values set in print jobs
override values set on the Paper Menu. If a print job requests the main
bin, the printer uses it, even if the default bin is set to something else.
2. If the Face-up Output Bin is open, all jobs are sent to it, regardless of any
other settings.
3. Do not print duplex print jobs when the Face-up Output Bin is open. The
Face-up Output Bin supports simplex jobs only. If the printer receives a
duplex job when the Face-up Output Bin is open, it stops printing until
the duplex job is canceled or deleted.
Making Duplex or Simplex Printing the Printer Default
Situation: You have the duplex unit installed and you want to make duplex
printing or simplex printing the printer default.
Action:
1. Press the Menu key until you see PAPER MENU in the display.
Chapter 4. Paper Handling
49