c.   Tighten the screws at the top and the bottom of the cover. 5.   Make sure you update your printer driver to indicate the new hard drive is installed.   Important!
If you need to relocate your printer, make sure to remove the hard drive
first. The Network Interface Card The printer attaches to networks and other system configurations through
these optional cards:
v  IBM Infoprint Ethernet 10/100 PCI Adapter
v  IBM Infoprint Token Ring 4/16 PCI Adapter
v  IBM Twinax SCS Interface Card
v  IBM Coax SCS Interface Card If you have purchased an optional network interface card for your printer,
install it in the printer following the steps listed in this section. A system or network administrator should review the documentation shipped
with the network interface card to configure the printer and your computing
environment correctly. Ethernet and Token Ring Configuration Guide is shipped
with the Ethernet and token-ring network interface cards. Twinax/Coax
Configuration Guide is shipped with the Twinax and Coax network interface
cards. Only a system or network administrator should configure your network
computing environment for this printer. 154    Infoprint 21: User’s Guide