Twinax SCS Menu Item Value Description TRAY  1
TRAY  2
TRAY  3
AUX
ENV COR*
C-PORT
PORT
LAND Specifies the default orientation for jobs printed from each
tray.
v  TRAY 1 is the upper 550-sheet input tray on the printer.
v  TRAY 2 and TRAY 3 are optional 550-sheet input trays. If     one optional tray is installed, it is TRAY 2. If two optional
    trays are installed, the middle tray is TRAY 2 and the
    bottom tray is TRAY 3.
v  AUX is the 100-sheet auxiliary tray.
v  ENV is the optional envelope feeder, which installs in place of the auxiliary tray. Each input can be assigned one of the following default
orientations:
v  COR—computer output reduction: Printing in landscape     with the logical page reduced to fit more data on the
    physical page. The printer reduces vertical spacing and
    uses a smaller font with less space between letters.
v  C-PORT—compressed portrait: printing in portrait, but     with compression. Horizontal compression is supported
    with 10 cpi only. The compression factor is fixed; it makes
    it possible to print 80 characters per line on A4 paper and
    85 characters per line on Letter paper.
v  PORT—portrait: the page has normal, upright business     letter orientation.
v  LAND—landscape: the page is wider than long. LPI 6*
8
0
3
4 Specifies a default lines per inch value. 0 specifies either the
value specified in the job, or the PCL default value for the
printer. CPI nn.n Specifies the default characters per inch, or pitch. nn can be
0, 5, 10, 12, 15, 17.1, 20, or 27. The default is 10. Chapter 6. Operator Panel Menus 115