Coaxial SCS Menu Item Value Description APO ON*
OFF Enables or disables automatic print orientation.
v  ON—if the requested dimensions of the job fit on the     paper, the page is printed either in portrait or landscape,
    whichever better fits the dimensions. If the requested
    dimensions do not fit on the paper, the default
    orientation for the tray (COR, PORT, LAND, or C-PORT)
    determines how the sheet is printed.
v  OFF—the page prints using the default orientation for the tray (COR, PORT, LAND, or C-PORT). Notes:
1.   Values specified in the data stream override values set at       the printer.
2.   The factory defaults (orientation set to COR and       APO=ENABLE) give you the most flexibility.
3.   The requested dimensions are determined by the values of CPI, LINE SPACING, MPP, and MPL for the job.
These values can be set in the data stream or on the
Coaxial SCS Menu. LPI 6*
8
0 Specifies a default lines per inch value for jobs received
over the coax interface. Valid values are 0, 6, and 8. The
default is 6 lines per inch. 0 specifies either the value
specified in the job, or the PCL default value for the printer. LINE SPACING 1*
2 Specifies single or double spacing:
v  1—single spacing
v  2—double spacing CPI nn.n Specifies the default characters per inch, or pitch. nn can be
0, 10, 12, 15, 16.7, 20, or 27. The default is 10 characters per
inch. 0 specifies a proportional font (FGID 1452). Note that
proportional fonts use proportional spacing, which may
cause unexpected results (for example, tabular data may
appear misaligned). MPL nnn Specifies the maximum page length (MPL) in lines per page.
Valid values are 0 to 255. 66 is the default. MPP nnn Specifies the maximum print position (MPP). Valid values
are 0 to 255. 132 is the default. 112    Infoprint 21: User’s Guide