Coaxial SCS Menu Item Value Description TRAY  1
TRAY  2
TRAY  3
AUX
ENV COR*
C-PORT
PORT
LAND Specifies the default orientation for jobs printed from each
tray.
v  TRAY 1 is the upper 550-sheet input tray on the printer.
v  TRAY 2 and TRAY 3 are optional 550-sheet input trays. If     one optional tray is installed, it is TRAY 2. If two optional
    trays are installed, the middle tray is TRAY 2 and the
    bottom tray is TRAY 3.
v  AUX is the 100-sheet auxiliary tray.
v  ENV is the optional envelope feeder, which installs in place of the auxiliary tray. Each input can be assigned one of the following default
orientations:
v  COR—computer output reduction: Printing in landscape     with the logical page reduced to fit more data on the
    physical page. The printer reduces vertical spacing and
    uses a smaller font with less space between letters.
v  C-PORT—compressed portrait: printing in portrait, but     with horizontal and vertical compression.
    Horizontal compression makes it possible to print 80
    characters per line in portrait when 10 cpi is used and
    133 characters per line when 16.7 cpi is used. The
    horizontal compression factor differs depending on paper
    size used. Because of this, no horizontal compression can
    be seen when Letter paper is used because Letter paper
    in portrait already allows 80 characters in 10 cpi.
    Vertical compression makes it possible to print 66 lines
    per page in 6 LPI or 88 lines per page in 8 LPI. The
    vertical compression factor also varies depending on the
    paper size used.
v  PORT—portrait: the page has normal, upright business     letter orientation. For envelopes from the auxiliary tray,
    PORT specifies normal envelope orientation.
v  LAND—landscape: the page is wider than long. Chapter 6. Operator Panel Menus 111