IPDS Menu Item Value Description PRINT MODE ENH*
STD v  ENH (ENHANCED)—the printer prints at 600 DPI which     produces optimal print quality and slower printer
    performance.
v  STD (STANDARD)—the printer prints at 300 DPI which produces good print quality and optimal printer
performance. Notes:
1.   To specify an IPDS resolution of 240, 600, or AUTO, you       must set PRINT MODE to ENH. (Use the RESOLUTION
      item on the IPDS Menu to specify the IPDS resolution.)
2.   If you change PRINT MODE, power off and then power on the printer for the new value to take effect. CACHING ON*
OFF Specifies whether or not to use caching for repeated
overlays.
v  ON—the printer uses caching, which provides better     performance for jobs with repeated overlays, but uses
    more memory.
v  OFF—the printer does not use caching, which requires less memory but provides less performance for jobs with
repeated overlays. Note:  Overlay caching is recommend for repeated overlays.
Overlay caching does not improve performance with
non-overlay IPDS data or overlays that are used only once
or infrequently. FONT CAPT ON*
OFF Sets FONT CAPTURE processing:
v  ON—allows the printer to save downloaded font     resources onto the hard drive for use beyond power
    cycles. The IPDS host must provide the Activate Resource
    command with proper resource identifiers prior to
    downloading the font resource to be captured.
v  OFF—the printer will not save downloaded font resources after a power cycle. Note:  This menu item is available only when a hard drive
is installed. Chapter 6. Operator Panel Menus 97