ON 20080802@10:42:34 AM at page: http://massmind.org/piclist/begin.htm#39662.3734259259 James Newton[JMN-EFP-786] removed post 39662.3734259259 with comment: 'Where are you getting that message from? Who is telling you to do that?' |Delete 'aravinthsalem@gmail.com asks:

I don't get one thing, WHY we Should use an ACTIVE LOW signal in most places of processors and controllers? What is the Advantages with Active Low Signals?

' ON 20080814@2:40:03 PM at page: http://www.piclist.com/piclist/faq.htm#39674.4184953704 James Newton[JMN-EFP-786] removed post 39674.4184953704 with comment: 'Not an apprpriate page.' |Delete 'vmanjubh.tech@gmail.com asks:

Hi,

I am working on PIC24F series micro controller. I have wrote all the interrupt handlers in a seperate file named interrupts.c. If i try use a variable which is defined ina any other file say uart.h it is throwing me an error saying that it is an undefined variable.

I have made all the registers and baud rate setting required for the UART communication. I have used UART2 for the same

illustration of the above expalined issue

interrupt.c file
--------------------

#include "uart.h"

void __attribute__((__interrupt__, auto_psv)) _U2RXInterrupt(void)
{
IFS1bits.U2RXIF = 0;
l_test_var_U8 = U2RXREG;
}

uart.c file
-------------

char l_test_var_U8;

uart.h file
--------------

extern char l_test_var_U8;

If i declare this variable in the interrupt.c file and use it then it is compling and working for me

Could you please let me know what the issue could. Hope my question is undersatndable ::))

Thanks and Regards

Manju Bhargavi

' ON 20080814@5:59:58 PM at page: http://www.piclist.com/piclist/index.htm#39674.6718518519 James Newton[JMN-EFP-786] removed post 39674.6718518519 |Delete ' i dont know who is hacking into the msn messanger's but it would be nice if they stop, ive been spammed by every person i know as well as it seems i'm being used to spam as well. i'm getting logged out from a remote location and it better stop soon. all messages contain "http://(persons/or own name).picslists.com ' ON 20080818@3:59:03 PM at page: http://www.piclist.com/piclist/index.htm#39678.3974537037 James Newton[JMN-EFP-786] removed post 39678.3974537037 |Delete 'michael@sophtware.com asks:

http://www.sophtware.com/2008/08/pic_timer_calculator_1.html Can you post the link somewhere appropriate on your site? See below:

Frustrated over having to compute offsets for Timer0 all the time, I finally broke down and wrote my own Windows application to do the work for me. It works for 8-, 16-, and 32- bit mode timers that function like Timer0. That is, they only have a 'prescalar' and an 'offset'.

This calculator not only displays the period for a given prescalar and offset, but it will also compute those values for you given a desired period (delay). The application is flexible, and if I get some feedback, I'll update it later to include all the other timers on the various PIC chips.

Oh, it's free too.

' ON 20080820@9:20:57 PM at page: http://www.piclist.com/piclist/index.htm#39680.6470601852 James Newton[JMN-EFP-786] removed post 39680.6470601852 |Delete 'lukkibessoni@gawab.com asks: " Hi all!
I love google and Yahoo!
:)
Bye"

' ON 20080823@7:43:25 PM at page: http://www.piclist.com/piclist/index.htm#39683.6481018519 James Newton[JMN-EFP-786] removed post 39683.6481018519 |Delete 'oofmvhbfb@i.ua asks:

girl bellyriding horse sex sex fran sisch women opinion circumcision sex sex friends in fultondale alabama mangas having sex laure manaudau sex tape oral sex unscored girl bellyriding horse sex sex friends in ruidoso new mexico sex dating in port blakely washington

' ON 20080828@9:16:11 AM at page: http://www.piclist.com/piclist/index.htm#39688.0720486111 James Newton[JMN-EFP-786] removed post 39688.0720486111 |Delete 'rakhi.yadav@linkingcampaign.net

Link Request and Exchange
To the owner of piclist.com

I am writing to you because I am exchanging links with some of the best â€œLinks" websites on the web like your http://www.piclist.com/and I came to know by visiting the page http://www.piclist.com/techref/microchip/links.htm
that you are interested in exchanging links and that's why I want to exchange reciprocal links between your and mine.I look forward to hearing from you soon so that we can both begin to enjoy the benefits of a link partnership.

Please use these link details to link back to us:
URL: http://www.maxtunity.com/
Title: IT Consultancy, IT Support & IT Research Services UK
Description: MaxTunity are expert IT consultants providing a broad range of IT consultancy, IT Support & IT Research services. Includes data management, project management, CRM, change management, network support, semantic technology etc.

Let me know once youâ€™ve added the link and Iâ€™ll post your link in the proper category of our resources page listed here: http://www.maxtunity.com/links.html or http://www.linksvalley.com/information_technology.asp Please be sure to include your desired title and description.
Thanks for your consideration.