ON 20080806@2:16:19 PM at page:
http://techref.massmind.org/pcb/etch/cx4200-vs.htm#39666.3986921296
James Newton[JMN-EFP-786] published post 39666.3986921296

<A TITLE="P-189.19.210.106" NAME="39666.3986921296" HREF="mailto:amirnospa _at_ hot mail com">amirnospa _at_ hot mail com</A> asks: <BLOCKQUOTE><A NAME="189.19.210.106">
</A> 
Dear Volkan, could you please post pictures of where to get xenc0/1, yenc0/1 and PDETECT? I´d also like to know what are the voltage levels of xenc and yenc. I´m planning to buy a C110/C120 and use AVR/8051 to spy encoder signals and drive a flatbed with PCB resting on it. I bought a used C65, expecting to spy the step/dir signals sent to stepper controller (Allegro A6628SEDT), but it is custom chip made for Epson, and Allegro can´t reveal details. Problem is I fried the printer with small short-circuit while measuring signals. Stupid me... Thanks!</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 39666.3986921296 EOR -->' but after: '<A TITLE="'.



ON 20080824@9:30:52 PM at page:
http://techref.massmind.org/pcb/etch/cx4200-vs.htm#39684.0476273148
James Newton[JMN-EFP-786] Published and replied to post 39684.0476273148

|Insert 'The problem with doing that is that the standard inks seem to wash off in the etchant. Even after baking, they dissolve. The MISPRO inks, because they actually contain a micro fine physical solid, resist the echant as long as they are baked in.
<BR>
Having said that, perhaps you will discover some process or method for resisting echant with the regular inks.' at: '<!-- 39684.0476273148 EOR -->'

<A TITLE="P-124.43.41.67" NAME="39684.0476273148">
</A> 
CAN I use c4200 without modifying anything. just by removing the body cover can i insert the copper board to print using the default cartridge.
|Delete 'P-' before: '<!-- 39684.0476273148 EOR -->' but after: '<A TITLE="'.



ON 20080824@9:31:16 PM at page:
http://techref.massmind.org/pcb/etch/cx4200-vs.htm#39684.0483217593
James Newton[JMN-EFP-786] removed post 39684.0483217593

|Delete '<A TITLE="P-124.43.41.67" NAME="39684.0483217593" HREF="mailto:farlincom@gmail.com">farlincom@gmail.com</A> &quot;<A NAME="124.43.41.67">
</A> 
CAN I use c4200 without modifying anything. just by removing the body cover can i insert the copper board to print using the default cartridge&quot;
<!-- 39684.0483217593 EOR -->

  <LI>'