ReadProcessMemory info  Overview  Group

The ReadProcessMemory function reads memory in a specified process. The entire area to be read must be accessible, or the operation fails.

BOOL ReadProcessMemory(

HANDLE hProcess,	// handle of the process whose memory is read
LPCVOID lpBaseAddress,	// address to start reading
LPVOID lpBuffer,	// address of buffer to place read data
DWORD nSize,	// number of bytes to read
LPDWORD lpNumberOfBytesRead	// address of number of bytes read
);

Parameters

hProcess

Identifies an open handle of a process whose memory is read. The handle must have PROCESS_VM_READ access to the process.

lpBaseAddress

Points to the base address in the specified process to be read. Before any data transfer occurs, the system verifies that all data in the base address and memory of the specified size is accessible for read access. If this is the case, the function proceeds; otherwise, the function fails.

lpBuffer

Points to a buffer that receives the contents from the address space of the specified process.

nSize

Specifies the requested number of bytes to read from the specified process.

lpNumberOfBytesRead

Points to the actual number of bytes transferred into the specified buffer. If lpNumberOfBytesRead is NULL, the parameter is ignored.

Return Values

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

The function fails if the requested read operation crosses into an area of the process that is inaccessible.

Remarks

ReadProcessMemory copies the data in the specified address range from the address space of the specified process into the specified buffer of the current process. Any process that has a handle with PROCESS_VM_READ access can call the function. The process whose address space is read is typically, but not necessarily, being debugged.

The entire area to be read must be accessible. If it is not, the function fails as noted previously.

See Also

WriteProcessMemory