Prev Next

FormatMessage info Overview Group

The FormatMessage function formats a message string. The function requires a message definition as input. The message definition can come from a buffer passed into the function. It can come from a message table resource in an already-loaded module. Or the caller can ask the function to search the system’s message table resource(s) for the message definition. The function finds the message definition in a message table resource based on a message identifier and a language identifier. The function copies the formatted message text to an output buffer, processing any embedded insert sequences if requested.

DWORD FormatMessage(

DWORD dwFlags,

// source and processing options

LPCVOID lpSource,

// pointer to message source

DWORD dwMessageId,

// requested message identifier

DWORD dwLanguageId,

// language identifier for requested message

LPTSTR lpBuffer,

// pointer to message buffer

DWORD nSize,

// maximum size of message buffer

va_list *Arguments

// address of array of message inserts

);

Parameters

dwFlags

Contains a set of bit flags that specify aspects of the formatting process and how to interpret the lpSource parameter. The low-order byte of dwFlags specifies how the function handles line breaks in the output buffer. The low-order byte can also specify the maximum width of a formatted output line.

You can specify a combination of the following bit flags:

Value

Meaning

FORMAT_MESSAGE_ALLOCATE_BUFFER

Specifies that the lpBuffer parameter is a pointer to a PVOID pointer, and that the nSize parameter specifies the minimum number of bytes (ANSI version) or characters (Unicode version) to allocate for an output message buffer. The function allocates a buffer large enough to hold the formatted message, and places a pointer to the allocated buffer at the address specified by lpBuffer. The caller should use the LocalFree function to free the buffer when it is no longer needed.

FORMAT_MESSAGE_IGNORE_INSERTS

Specifies that insert sequences in the message definition are to be ignored and passed through to the output buffer unchanged. This flag is useful for fetching a message for later formatting. If this flag is set, the Arguments parameter is ignored.

FORMAT_MESSAGE_FROM_STRING

Specifies that lpSource is a pointer to a null-terminated message definition. The message definition may contain insert sequences, just as the message text in a message table resource may. Cannot be used with FORMAT_MESSAGE_FROM_HMODULE or FORMAT_MESSAGE_FROM_SYSTEM.

FORMAT_MESSAGE_FROM_HMODULE

Specifies that lpSource is a module handle containing the message-table resource(s) to search. If this lpSource handle is NULL, the current process’s application image file will be searched. Cannot be used with FORMAT_MESSAGE_FROM_STRING.

FORMAT_MESSAGE_FROM_SYSTEM

Specifies that the function should search the system message-table resource(s) for the requested message. If this flag is specified with FORMAT_MESSAGE_FROM_HMODULE, the function searches the system message table if the message is not found in the module specified by lpSource. Cannot be used with FORMAT_MESSAGE_FROM_STRING.
If this flag is specified, an application can pass the result of the GetLastError function to retrieve the message text for a system-defined error.

FORMAT_MESSAGE_ARGUMENT_ARRAY

Specifies that the Arguments parameter is not a va_list structure, but instead is just a pointer to an array of 32-bit values that represent the arguments.

The low-order byte of dwFlags can specify the maximum width of a formatted output line. Use the FORMAT_MESSAGE_MAX_WIDTH_MASK constant and bitwise Boolean operations to set and retrieve this maximum width value.

The following table shows how FormatMessage interprets the value of the low-order byte.

Value

Meaning

0

There are no output line width restrictions. The function stores line breaks that are in the message definition text into the output buffer.

A nonzero value other than FORMAT_MESSAGE_MAX_WIDTH_MASK

The nonzero value is the maximum number of characters in an output line. The function ignores regular line breaks in the message definition text. The function never splits a string delimited by white space across a line break. The function stores hard-coded line breaks in the message definition text into the output buffer. Hard-coded line breaks are coded with the %n escape sequence.

FORMAT_MESSAGE_MAX_WIDTH_MASK

The function ignores regular line breaks in the message definition text. The function stores hard-coded line breaks in the message definition text into the output buffer. The function generates no new line breaks.

lpSource

Specifies the location of the message definition. The type of this parameter depends upon the settings in the dwFlags parameter.

dwFlags Setting	Parameter Type
FORMAT_MESSAGE_FROM_HMODULE	lpSource is an hModule of the module that contains the message table to search.
FORMAT_MESSAGE_FROM_STRING	lpSource is an LPTSTR that points to unformatted message text. It will be scanned for inserts and formatted accordingly.

If neither of these flags is set in dwFlags, then lpSource is ignored.

dwMessageId

Specifies the 32-bit message identifier for the requested message. This parameter is ignored if dwFlags includes FORMAT_MESSAGE_FROM_STRING.

dwLanguageId

Specifies the 32-bit language identifier for the requested message. This parameter is ignored if dwFlags includes FORMAT_MESSAGE_FROM_STRING.

If you pass a specific LANGID in this parameter, FormatMessage will return a message for that LANGID only. If the function cannot find a message for that LANGID, it returns ERROR_RESOURCE_LANG_NOT_FOUND. If you pass in zero, FormatMessage looks for a message for LANGIDs in the following order:

Language neutral
Thread LANGID, based on the thread's locale value
User default LANGID, based on the user's default locale value
System default LANGID, based on the system default locale value
US English

If FormatMessage doesn't find a message for any of the preceding LANGIDs, it returns any language message string that is present. If that fails, it returns ERROR_RESOURCE_LANG_NOT_FOUND.

lpBuffer

Points to a buffer for the formatted (and null-terminated) message. If dwFlags includes FORMAT_MESSAGE_ALLOCATE_BUFFER, the function allocates a buffer using the LocalAlloc function, and places the address of the buffer at the address specified in lpBuffer.

nSize

If the FORMAT_MESSAGE_ALLOCATE_BUFFER flag is not set, this parameter specifies the maximum number of bytes (ANSI version) or characters (Unicode version) that can be stored in the output buffer. If FORMAT_MESSAGE_ALLOCATE_BUFFER is set, this parameter specifies the minimum number of bytes or characters to allocate for an output buffer.

Arguments

Points to an array of 32-bit values that are used as insert values in the formatted message. %1 in the format string indicates the first value in the Arguments array; %2 indicates the second argument; and so on.

The interpretation of each 32-bit value depends on the formatting information associated with the insert in the message definition. The default is to treat each value as a pointer to a null-terminated string.

By default, the Arguments parameter is of type va_list*, which is a language- and implementation-specific data type for describing a variable number of arguments. If you do not have a pointer of type va_list*, then specify the FORMAT_MESSAGE_ARGUMENT_ARRAY flag and pass a pointer to an array of 32-bit values; those values are input to the message formatted as the insert values. Each insert must have a corresponding element in the array.

Return Values

If the function succeeds, the return value is the number of bytes (ANSI version) or characters (Unicode version) stored in the output buffer, excluding the terminating null character.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

Remarks

The FormatMessage function can be used to obtain error message strings for the system error codes returned by GetLastError, as shown in the following sample code.

LPVOID lpMsgBuf;



FormatMessage( 

    FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM,

    NULL,

    GetLastError(),

    MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), // Default language

    (LPTSTR) &lpMsgBuf,

    0,

    NULL 

);



// Display the string.

MessageBox( NULL, lpMsgBuf, "GetLastError", MB_OK|MB_ICONINFORMATION );



// Free the buffer.

LocalFree( lpMsgBuf );

Within the message text, several escape sequences are supported for dynamically formatting the message. These escape sequences and their meanings are shown in the following table. All escape sequences start with the percent character (%).

Escape Sequence

Meaning

%0

Terminates a message text line without a trailing newline character. This escape sequence can be used to build up long lines or to terminate the message itself without a trailing newline character. It is useful for prompt messages.

%n!printf format string!

Identifies an insert. The value of n can be in the range 1 through 99. The printf format string (which must be bracketed by exclamation marks) is optional and defaults to !s! if not specified.

The printf format string can contain the * specifier for either the precision or the width component. If * is specified for one component, the FormatMessage function uses insert %n+1; it uses %n+2 if * is specified for both components.

Floating-point printf format specifiers ¾ e, E, f, and g ¾ are not supported. The workaround is to to use the sprintf function to format the floating-point number into a temporary buffer, then use that buffer as the insert string.

Any other nondigit character following a percent character is formatted in the output message without the percent character. Following are some examples:

Format string

Resulting output

%%

A single percent sign in the formatted message text.

%n

A hard line break when the format string occurs at the end of a line. This format string is useful when FormatMessage is supplying regular line breaks so the message fits in a certain width.

%space

A space in the formatted message text. This format string can be used to ensure the appropriate number of trailing spaces in a message text line.

%.

A single period in the formatted message text. This format string can be used to include a single period at the beginning of a line without terminating the message text definition.

%!

A single exclamation point in the formatted message text. This format string can be used to include an exclamation point immediately after an insert without its being mistaken for the beginning of a printf format string.

DWORD dwFlags,	// source and processing options
LPCVOID lpSource,	// pointer to message source
DWORD dwMessageId,	// requested message identifier
DWORD dwLanguageId,	// language identifier for requested message
LPTSTR lpBuffer,	// pointer to message buffer
DWORD nSize,	// maximum size of message buffer
va_list *Arguments	// address of array of message inserts
);

Value	Meaning
FORMAT_MESSAGE_ALLOCATE_BUFFER
	Specifies that the lpBuffer parameter is a pointer to a PVOID pointer, and that the nSize parameter specifies the minimum number of bytes (ANSI version) or characters (Unicode version) to allocate for an output message buffer. The function allocates a buffer large enough to hold the formatted message, and places a pointer to the allocated buffer at the address specified by lpBuffer. The caller should use the LocalFree function to free the buffer when it is no longer needed.
FORMAT_MESSAGE_IGNORE_INSERTS
	Specifies that insert sequences in the message definition are to be ignored and passed through to the output buffer unchanged. This flag is useful for fetching a message for later formatting. If this flag is set, the Arguments parameter is ignored.
FORMAT_MESSAGE_FROM_STRING
	Specifies that lpSource is a pointer to a null-terminated message definition. The message definition may contain insert sequences, just as the message text in a message table resource may. Cannot be used with FORMAT_MESSAGE_FROM_HMODULE or FORMAT_MESSAGE_FROM_SYSTEM.
FORMAT_MESSAGE_FROM_HMODULE
	Specifies that lpSource is a module handle containing the message-table resource(s) to search. If this lpSource handle is NULL, the current process’s application image file will be searched. Cannot be used with FORMAT_MESSAGE_FROM_STRING.
FORMAT_MESSAGE_FROM_SYSTEM
	Specifies that the function should search the system message-table resource(s) for the requested message. If this flag is specified with FORMAT_MESSAGE_FROM_HMODULE, the function searches the system message table if the message is not found in the module specified by lpSource. Cannot be used with FORMAT_MESSAGE_FROM_STRING. If this flag is specified, an application can pass the result of the GetLastError function to retrieve the message text for a system-defined error.
FORMAT_MESSAGE_ARGUMENT_ARRAY
	Specifies that the Arguments parameter is not a va_list structure, but instead is just a pointer to an array of 32-bit values that represent the arguments.

Value	Meaning
0	There are no output line width restrictions. The function stores line breaks that are in the message definition text into the output buffer.
A nonzero value other than FORMAT_MESSAGE_MAX_WIDTH_MASK	The nonzero value is the maximum number of characters in an output line. The function ignores regular line breaks in the message definition text. The function never splits a string delimited by white space across a line break. The function stores hard-coded line breaks in the message definition text into the output buffer. Hard-coded line breaks are coded with the %n escape sequence.
FORMAT_MESSAGE_MAX_WIDTH_MASK	The function ignores regular line breaks in the message definition text. The function stores hard-coded line breaks in the message definition text into the output buffer. The function generates no new line breaks.

Escape Sequence	Meaning
%0	Terminates a message text line without a trailing newline character. This escape sequence can be used to build up long lines or to terminate the message itself without a trailing newline character. It is useful for prompt messages.
%n!printf format string!	Identifies an insert. The value of n can be in the range 1 through 99. The printf format string (which must be bracketed by exclamation marks) is optional and defaults to !s! if not specified.
	The printf format string can contain the * specifier for either the precision or the width component. If * is specified for one component, the FormatMessage function uses insert %n+1; it uses %n+2 if * is specified for both components.
	Floating-point printf format specifiers ¾ e, E, f, and g ¾ are not supported. The workaround is to to use the sprintf function to format the floating-point number into a temporary buffer, then use that buffer as the insert string.

Format string	Resulting output
%%	A single percent sign in the formatted message text.
%n	A hard line break when the format string occurs at the end of a line. This format string is useful when FormatMessage is supplying regular line breaks so the message fits in a certain width.
%space	A space in the formatted message text. This format string can be used to ensure the appropriate number of trailing spaces in a message text line.
%.	A single period in the formatted message text. This format string can be used to include a single period at the beginning of a line without terminating the message text definition.
%!	A single exclamation point in the formatted message text. This format string can be used to include an exclamation point immediately after an insert without its being mistaken for the beginning of a printf format string.

FormatMessage info Overview Group

Parameters

Return Values

Remarks

See Also