The EndDialog function destroys a modal dialog box, causing the system to end any processing for the dialog box.
BOOL EndDialog(
|
HWND hDlg, |
// handle to dialog box |
|
int nResult |
// value to return |
|
); |
If the function succeeds, the return value is nonzero.
If the function fails, the return value is zero. To get extended error information, call GetLastError.
Dialog boxes created by the DialogBox, DialogBoxParam, DialogBoxIndirect, and DialogBoxIndirectParam functions must be destroyed using the EndDialog function. An application calls EndDialog from within the dialog box procedure; the function must not be used for any other purpose.
A dialog box procedure can call EndDialog at any time, even during the processing of the WM_INITDIALOG message. If your application calls the function while WM_INITDIALOG is being processed, the dialog box is destroyed before it is shown and before the input focus is set.
EndDialog does not destroy the dialog box immediately. Instead, it sets a flag and allows the dialog box procedure to return control to the system. The system checks the flag before attempting to retrieve the next message from the application queue. If the flag is set, the system ends the message loop, destroys the dialog box, and uses the value in nResult as the return value from the function that created the dialog box.
DialogBox, DialogBoxIndirect, DialogBoxIndirectParam, DialogBoxParam, WM_INITDIALOG