ON 20140802@11:24:11 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/language/java/script/index.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://techref.massmind.org/techref/diff.asp?url=\Techref\language\java\script\index.htm&version=51
ON 20140802@10:59:42 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/other/airwater.htm#41853.9581134259
James Newton[JMN-EFP-786] See also:
http://www.australasianscience.com.au/article/issue-may-2010/can-mimicking-nature-quench-our-thirst.html
In a 2001 paper published in Nature, Andrew Parker and Chris Lawrence of The University of Oxford demonstrated that the Stenocara exoskeleton consists of a near-random array of bumps approximately 0.5–1.5mm (0.02-0.06") apart and 0.5mm (0.02") in diameter on top of a smooth and waxy background. The bumps were hydrophilic (water-loving) while the waxy background was particularly water-repellent. ...moisture rapidly condenses on the bumps. Re-evaporation is minimal due the reduced surface area of bumps, so each droplet of water grows with continued condensation of water until it completely covers each hydrophilic bump. The water droplet then rolls down...
ON 20140802@11:14:43 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/other/airwater.htm#41853.9685416667
James Newton[JMN-EFP-786] See also:
http://www.fogquest.org
Non-profit helps setup fog collectors. A test unit costs as little as $75 to make from "35% shade coefficient, Raschel weave, u.v. protected polypropylene or polyethylene mesh". It does require fog, (not haze or high humidity) to capture water.
ON 20140802@11:32:29 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/other/airwater.htm#41853.9808912037
James Newton[JMN-EFP-786] See also:
http://www.akvopedia.org/wiki/Fog_collection_and_storage
ON 20140802@11:36:58 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/other/airwater.htm#41853.9840046296
James Newton[JMN-EFP-786] See also:
http://www.barixa.net/fogquest-manual_2011.pdf
ON 20140802@11:44:12 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/pcb/smd/handsolder.htm#41853.9890277778
James Newton[JMN-EFP-786] Says
ON 20140805@5:36:27 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/io/sensor/pos/opticalranging.htm#41856.7336342593
James Newton[JMN-EFP-786] See also:
http://dspace.mit.edu/bitstream/handle/1721.1/6483/AIM-1016.pdf?sequence=2
Herbert the soda can collecting robot, Used a laser line, with a camera, and a parallel network of small 6800 uC's to look for the laser in each line of video.
ON 20140807@8:21:45 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/language/java/script/embedded.htm#41858.3484259259
James Newton[JMN-EFP-786] See also:
http://tasker.dinglisch.net/userguide/en/javascript.html
The "Tasker" Android app supports Javascript and provides access to most functions of the phone directly or via "Intents".
ON 20140807@8:38:29 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/language/java/script/embedded.htm#41858.3600578704
James Newton[JMN-EFP-786] See also:
https://play.google.com/store/apps/details?id=com.smartphoneremote.androidscriptfree
AndroidScript app supports Javascript programming on smartphones; either directly on the phone, or from your PC via a built in browser IDE.
ON 20140811@3:11:44 AM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/silverdr-wfmh-/index.htm#
[silverdr-wfmh-] edited the page. Difference:
http://www.piclist.com/techref/diff.asp?url=\Techref\member\silverdr-wfmh-\index.htm&version=0
ON 20140811@5:25:09 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/other/solar/case1.htm#41862.725787037
James Newton[JMN-EFP-786] Says
As of August 2014, the new inverter had produced 4,207 Kilowatt Hrs.
ON 20140812@3:11:09 AM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/faq.htm#41863.1327314815
Timothy Henry[TH-yahoo-] Questions:
Hi, i'm confused about where to connect my negative cable from the PSU. There is the M+ and ground, but where is the M-? should i just connect it to the AC ground on the PSU? thanks.
ON 20140812@9:03:14 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/other/airwater.htm#41863.3772453704
James Newton[JMN-EFP-786] See also:
http://www.water-gen.com/
Active Military grade systems from Israel
ON 20140812@9:15:56 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/other/airwater.htm#41863.3772453704
James Newton[JMN-EFP-786] Replied to post 41863.3772453704 by http://www.water-gen.com/ TARGET=_top
|Insert 'Patent US20110048039' at: ''
http://www.water-gen.com/
Active Military grade systems from Israel
ON 20140812@11:44:52 AM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/faq.htm#41863.1327314815
James Newton[JMN-EFP-786] Replied to post 41863.1327314815
|Insert 'On a unipolar motor, M- and ground are the same. When you say "negative cable" I'm not sure if you mean ground or an actual negative supply voltage. Ground connects to ground, but there is no place to connect a negative supply; just leave that off.' at: ''
Hi, i'm confused about where to connect my negative cable from the PSU. There is the M+ and ground, but where is the M-? should i just connect it to the AC ground on the PSU? thanks.
ON 20140812@2:08:51 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/io/servo/html4audiopwm.html#
James Newton[JMN-EFP-786] edited the page. Difference:
http://techref.massmind.org/techref/diff.asp?url=\Techref\io\servo\html4audiopwm.html&version=0
ON 20140813@3:35:02 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/pcb/etch/inkjetCDtray.htm#41857.312662037
James Newton[JMN-EFP-786] published post 41857.312662037
alienrelics@yahoo.com refers to
http://www.amazon.com/ID-Starter-Platinum-Cards-similar/dp/B005FYLJ7Y/ref=sr_1_2?ie=UTF8&qid=1407335357&sr=8-2&keywords=id+card+tray+epson I bought an ID card printing tray and an ID card cutter. The cutter will take 0.032 inch PCB, although the tray itself may even take 0.062 inch PCB. And I paid a little extra to get 100 inkjet printable ID cards to practice on.ON 20140813@4:30:35 PM at page: On a web page you were interested in at: http://techref.massmind.org/Techref/pcb/etch/directlaserprint.htm#41855.4725 James Newton[JMN-EFP-786] removed post 41855.4725 |Delete ' http://www.google.com/m?client=ms-android-verizon&source=android-home Modify the Lexmark e260 for direct laser toner etch resist printing.