When used for division, except in cases where the sum of the terms exactly equals the divisor (e.g. divisor is 8/3 = 2.6666667), the computed quotient will always be slightly smaller than the actual quotient. Rounding can be helpful, particularly with small quotients. Before the final shift, simply examine the highest-order bit that would be shifted out and add it after the final shift.ON 20130502@2:39:02 PM at page: On a web page you were interested in at: http://www.massmind.org/member/XUUJ46YMBCWWQ/index.htm#41381.4767013889 James Newton[JMN-EFP-786] Published and replied to post 41381.4767013889 by pmwcc |Insert 'Sorry to take so long to answer, I don't normally monitor questions members post to their own walls. Yes, and even the enable isn't really requried (you could just tie it on). You probably already know, but power is /both/ logic (+5vdc) and motor power (up to 50vdc). Please let me know how it goes? Thanks!' at: '' pmwcc@verizon.net asks:
e.g. if the last shifting is 4 places and the bits that would be shifted out are 1xxx, add 1 after the last shift.
Try this for 9 divided by 3, using 7 terms. Without rounding, the quotient will be 2. Rounding "fixes" that.
I wish to connect a THB6064AH to a ramps 1.4 breakout board. Is all that's required; step, dir, and enable? Thank you.Excluding power and steppers of course.|Delete 'P-' before: '' but after: 'kolmyk@gmail.com asks:
как же достали все эти политики, не политики а проститутки которые продаются за власть и деньги!' ON 20130502@2:49:11 PM at page: On a web page you were interested in at: http://www.piclist.com/microchip/links.htm#41388.2093171296 James Newton[JMN-EFP-786] removed post 41388.2093171296 |Delete 'link@technotronix.us refers to
http://www.technotronix.us TechnoTronix provide PCB Design for Test, PCB Testing, PCB Design for Manufacturability, Lead Free PCB Design, PB-Free, pcb-free assembly, PCB Manufacturer, Surface Mount and Surface Mount PCB.
http://technotronix.us/ TechnoTronix is a leader in the manufacture and assembly of printed circuit boards. We have established technical excellence in PCB production which is unsurpassed by our competition. We are committed to applying advanced production techniques and manufacturing.ON 20130502@3:04:53 PM at page: On a web page you were interested in at: http://techref.massmind.org/pcb/etch/directinkjetresist.htm#41389.4011458333 James Newton[JMN-EFP-786] published post 41389.4011458333 thebeathat@gmail.com asks: " Does Direct PCB printing works on Epson Stylus T13 if modified?" ON 20130502@3:06:36 PM at page: On a web page you were interested in at: http://techref.massmind.org/Techref/pcb/etch/directinkjetresist.htm#40752.6148148148 James Newton[JMN-EFP-786] removed post 40752.6148148148 |Delete 'http://www.grafika.cz/art/reportaze/epson-telford.html good
mail pass rcn.com' ON 20130508@1:37:27 PM at page: On a web page you were interested in at: http://www.piclist.com/Techref/microchip/bob.htm# James Newton[JMN-EFP-786] edited the page. Difference: http://www.piclist.com/techref/diff.asp?url=\Techref\microchip\bob.htm&version=2 ON 20130509@2:22:44 PM at page: On a web page you were interested in at: http://www.piclist.com/Techref/io/stepper/nemasizes.htm#41403.2151041667 James Newton[JMN-EFP-786] Published and replied to post 41403.2151041667 by przemek.klosowski+piclist |Insert 'I'm not sure where you are seeing 1.856 on this page?' at: '' przemek.klosowski+piclist@gmail.com " NEMA bolt pattern: for NEMA23 you quote 1.856in but the actual value is 1.854in or 47.14mm (your number results in 47.0916mm)" |Delete 'P-' before: '' but after: 'przemek.klosowski+piclist@gmail.com " NEMA bolt pattern: for NEMA23 you quote 1.856in but the actual value is 1.854in or 47.14mm (your number results in 47.0916mm)" James Newton of MassMind replies: I'm not sure where you are seeing 1.856 on this page?
'
ON 20130515@5:17:37 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/4axis3build.htm#41409.6238078704
James Newton[JMN-EFP-786] removed post 41409.6238078704
|Delete 'http://cmequest.com/louisvuittonhandbagsoutlet.htm/ : "
There is definately a great deal to find out about this subject. I like all of the points you made.
"