ON 20120202@11:40:11 AM at page:
On a web page you were interested in at:
http://www.piclist.com/io/serial/rs232.htm#40939.288587963
James Newton[JMN-EFP-786] removed post 40939.288587963

|Delete '<A TITLE="P-64.134.26.127" NAME="40939.288587963" HREF="http://www.findacellphoneuser.com/" TARGET="_top">
http://www.findacellphoneuser.com/</A> 
This post was truly an inspiration to me.  What I have gained from reading this will last, I believe, beyond mere months.  This is what I'm saying.<!-- 40939.288587963 EOR -->

  <LI>'



ON 20120202@11:40:31 AM at page:
On a web page you were interested in at:
http://www.massmind.org/other/newtons/ps01/ps01_032.htm#40940.5718171296
James Newton[JMN-EFP-786] published post 40940.5718171296

<A TITLE="P-98.176.169.111" NAME="40940.5718171296" HREF="http://genealogytrails.com/scar/marlboro/hx_churches.htm" TARGET="_top">
http://genealogytrails.com/scar/marlboro/hx_churches.htm</A> 
&quot;Many years before the war, a good framed school building was erected, principally through the efforts  of Rev.  Cornelius  Newton, who   lived about three miles southeast of the place and always took a lively interest in its educational affairs.&quot;<BR>
<BR>
&quot;Cornelius Newton married the daughter of Rev. Robt. Purnell, who is elsewhere named as the pioneer local preacher of the Beauty Spot section. Cornelius Newton was born 25th December, 1797; was a son of Younger Newton and grandson of Giles Newton, Sr.,who came to this county from Henrico County, Virginia, in the latter part of the last century, and was the great progenitor of all the Newton family in this country, which has grown to great proportions and intermarried with the Adams, Gibsons, Fletchers, etc., till its relations number in the hundreds, perhaps. Cornelius Newton is the only one of the local preachers whose complete history we have been able to get.<BR>
<BR>
He was married, as stated, to a daughter (Dorcas) of Robt. Purnell on 31st December, 1818, and joined the church in the summer of 1820, and embraced religion in October, 1821, appointed class leader in 1822 and licensed to exhort in 1830; licensed to preach in 1834; ordained Deacon in 1838; and was recommended for Elders' Orders in 1842. He reared a large and interesting family, many of whom still survive; among them Cornelius D. Newton, Joseph Newton and Hope Hull Newton. He was a successful planter and a faithful soldier of the cross, and after &quot;having served his own generation, by the will of God fell on sleep&quot; in the summer of 1878.&quot;




ON 20120202@1:04:43 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/member/puuf/sourcesYouthChoir.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://techref.massmind.org/techref/diff.asp?url=\Techref\member\puuf\sourcesYouthChoir.htm&version=0



ON 20120202@1:13:19 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/member/JMN-EFP-786/index.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://techref.massmind.org/techref/diff.asp?url=\Techref\member\JMN-EFP-786\index.htm&version=1



ON 20120206@3:13:18 PM at page:
On a web page you were interested in at:
http://www.piclist.com/io/lcd/lcd.asm.htm#40943.518287037
James Newton[JMN-EFP-786] published post 40943.518287037

<A TITLE="P-94.242.65.62" NAME="40943.518287037">
</A> 
This is right:<BR>
; Format: xxxxSRxx		  S: 1= Display shift, 0= Cursor move<BR>
	movlw	b'00001000'		; R: 1= Shift right, 0= Shift left




ON 20120209@9:50:51 AM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/faq.htm#40948.4103125
cheung raychar[cr-rrr-O53] Questions:

I have several pieces of Vexta PK266M-02A motors which are of DC 2A, 2 phase, 0.9degree/step. Is the linistep driver suitable for it? Also, my router's x-axis is driven by two leadscrews and motors. Can two linistep drivers be synchronized for them and how?<BR>
<BR>
Thanks,<BR>
Raychar<BR>




ON 20120209@12:55:46 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/member/puuf/sourcescantata.htm#
Tim McKnight[TMK-CUU-ZZZ] edited the page. Difference:
http://www.massmind.org/techref/diff.asp?url=\Techref\member\puuf\sourcescantata.htm&version=62



ON 20120209@12:56:15 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/member/puuf/sourcescantata.htm#
Tim McKnight[TMK-CUU-ZZZ] edited the page. Difference:
http://www.massmind.org/techref/diff.asp?url=\Techref\member\puuf\sourcescantata.htm&version=63



ON 20120209@12:56:44 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/member/puuf/sourcescantata.htm#
Tim McKnight[TMK-CUU-ZZZ] edited the page. Difference:
http://www.massmind.org/techref/diff.asp?url=\Techref\member\puuf\sourcescantata.htm&version=64



ON 20120210@12:05:31 PM at page:
On a web page you were interested in at:
http://www.piclist.com/ascii.htm#40947.2229166667
James Newton[JMN-EFP-786] removed post 40947.2229166667

|Delete '<A TITLE="P-222.108.11.41" NAME="40947.2229166667">
</A> 
4d 00 e8<!-- 40947.2229166667 EOR -->

  <LI>'



ON 20120210@12:59:35 PM at page:
On a web page you were interested in at:
http://www.piclist.org/Techref/member/HR-emi-d28/index.htm#
Satish[HR-emi-d28] change

|Replace: '<META http-equiv="Bulletin-Text" content="HR-emi-d28">' with: ''



ON 20120210@12:59:48 PM at page:
On a web page you were interested in at:
http://www.piclist.org/Techref/member/HR-emi-d28/index.htm#
Satish[HR-emi-d28] I have agreed to maintain this page.



ON 20120210@3:32:30 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/other/mentalhealth.htm#40949.6475694444
James Newton[JMN-EFP-786] See also:
http://www.ted.com/talks/shawn_achor_the_happy_secret_to_better_work.html




ON 20120210@3:52:29 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/IMB-yahoo-J86/index.htm#
Isaac Marino Bavaresco[IMB-yahoo-J86] edited the page. Difference:
http://www.piclist.com/techref/diff.asp?url=\Techref\member\IMB-yahoo-J86\index.htm&version=0



ON 20120210@3:53:11 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/IMB-yahoo-J86/index.htm#
Isaac Marino Bavaresco[IMB-yahoo-J86] edited the page. Difference:
http://www.piclist.com/techref/diff.asp?url=\Techref\member\IMB-yahoo-J86\index.htm&version=1



ON 20120210@3:55:19 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/IMB-yahoo-J86/index.htm#
Isaac Marino Bavaresco[IMB-yahoo-J86] edited the page. Difference:
http://www.piclist.com/techref/diff.asp?url=\Techref\member\IMB-yahoo-J86\index.htm&version=2



ON 20120210@3:55:57 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/IMB-yahoo-J86/index.htm#
Isaac Marino Bavaresco[IMB-yahoo-J86] edited the page. Difference:
http://www.piclist.com/techref/diff.asp?url=\Techref\member\IMB-yahoo-J86\index.htm&version=3



ON 20120210@3:56:54 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/IMB-yahoo-J86/index.htm#
Isaac Marino Bavaresco[IMB-yahoo-J86] edited the page. Difference:
http://www.piclist.com/techref/diff.asp?url=\Techref\member\IMB-yahoo-J86\index.htm&version=4



ON 20120210@4:00:11 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/IMB-yahoo-J86/index.htm#
Isaac Marino Bavaresco[IMB-yahoo-J86] edited the page. Difference:
http://www.piclist.com/techref/diff.asp?url=\Techref\member\IMB-yahoo-J86\index.htm&version=5



ON 20120214@9:30:15 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/os/win/2008sbs.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://techref.massmind.org/techref/diff.asp?url=\Techref\os\win\2008sbs.htm&version=36



ON 20120214@9:34:31 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/os/win/2008sbs.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://techref.massmind.org/techref/diff.asp?url=\Techref\os\win\2008sbs.htm&version=37



ON 20120214@11:51:53 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/n-yahoo-0A4/index.htm#40953.9943634259
nandini[n-yahoo-0A4] Questions:

if wanna use rtc for clock and external eeprom for store power reading, how the connection should be? if possible to connect both at same pin scl and sca, the coding for both should be same. i mean if rtc coding used i2c, the external eeprom code also have to use i2c?



ON 20120214@11:52:14 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/n-yahoo-0A4/index.htm#
nandini[n-yahoo-0A4] change

|Replace: '<META http-equiv="Bulletin-Text" content="n-yahoo-0A4">' with: ''



ON 20120215@10:42:05 AM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/faq.htm#40948.4103125
James Newton[JMN-EFP-786] Replied to post 40948.4103125 by cr-rrr-O53

|Insert 'Those motors should be find as long as they have 5 or more wires. Any two stepper drivers can be synced, but once they are in sync, the only way to keep them synced is to ensure they never loose a step, and that requires some care. In general, it's been done, and it works, but make sure you have more than enough drive capacity.' at: '<!-- 40948.4103125 EOR -->'

<A TITLE="cr-rrr-O53" NAME="40948.4103125" HREF="/techref/member/cr-rrr-O53/index.htm">cheung raychar</A> asks: <BLOCKQUOTE><A NAME="cr-rrr-O53">
</A> 
I have several pieces of Vexta PK266M-02A motors which are of DC 2A, 2 phase, 0.9degree/step. Is the linistep driver suitable for it? Also, my router's x-axis is driven by two leadscrews and motors. Can two linistep drivers be synchronized for them and how?<BR>
<BR>
Thanks,<BR>
Raychar<BR>
</BLOCKQUOTE>




ON 20120217@11:20:39 PM at page:
On a web page you were interested in at:
http://www.massmind.org/Techref/member/puuf/sourcescantata.htm#
Tim McKnight[TMK-CUU-ZZZ] edited the page. Difference:
http://www.massmind.org/techref/diff.asp?url=\Techref\member\puuf\sourcescantata.htm&version=65



ON 20120219@5:28:42 AM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/member/JG-gmail-/index.htm#
Joao Goedert[JG-gmail-] change

|Replace: '<META http-equiv="Bulletin-Text" content="JG-gmail-">' with: ''



ON 20120220@2:25:15 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/tools.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://techref.massmind.org/techref/diff.asp?url=\Techref\tools.htm&version=0



ON 20120222@9:35:29 AM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/faq.htm#40961.3996296296
cheung raychar[cr-rrr-O53] Questions:

What dc voltage and ampere of power supply are required to push three Linistepper boards and three these motors (1.8ohm and 2A)? Are two 0.5ohm 4W resistors required in each board?  Thanks<BR>




ON 20120222@1:30:56 PM at page:
On a web page you were interested in at:
http://www.piclist.com/microchip/language/C/7segment_C.htm#40955.794537037
James Newton[JMN-EFP-786] removed post 40955.794537037

|Delete '<A TITLE="P-60.246.150.187" NAME="40955.794537037">
</A> 
hello<!-- 40955.794537037 EOR -->

   <LI>'



ON 20120222@1:34:09 PM at page:
On a web page you were interested in at:
http://www.piclist.com/microchip/bmp2asm.htm#40956.0444675926
James Newton[JMN-EFP-786] removed post 40956.0444675926

|Delete '<A TITLE="P-115.248.161.109" NAME="40956.0444675926" HREF="http://xtronix.in/blog" TARGET="_top">
http://xtronix.in/blog</A> 
please share the software, i don't know delphi programming<!-- 40956.0444675926 EOR -->
</UL>'



ON 20120222@1:36:33 PM at page:
On a web page you were interested in at:
http://www.sxlist.com/Techref/other/windmills.htm#40959.6077546296
James Newton[JMN-EFP-786] removed post 40959.6077546296

|Delete '<A TITLE="P-71.141.107.202" NAME="40959.6077546296">
</A> 
PLAGARISM!!!<!-- 40959.6077546296 EOR -->

  <LI>'



ON 20120222@1:37:50 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/lini.htm#40368.7128935185
James Newton[JMN-EFP-786] removed post 40368.7128935185

|Delete '<A TITLE="P-128.138.64.101" NAME="40368.7128935185" HREF="mailto:irene830@hotmail.com">irene830@hotmail.com</A> asks: <BLOCKQUOTE><A NAME="128.138.64.101">
</A> 
hi i connected a micro step motor to this board. i gave a square waveform to the board and i can see the square waveform from the pins of PIC.The amplitude is 5V. the problem is that after resistor network RN3. the amplitude of this square waveform becomes 1V which is not enough to drive the transistor.So i can only hear the sound of motor(like DA DA DA), but it doesnt turn. any ideas what happened? btw, no components are getting hot.</BLOCKQUOTE>
<!-- 40368.7128935185 EOR -->

   <LI>'



ON 20120222@1:40:53 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/faq.htm#40961.3996296296
James Newton[JMN-EFP-786] Replied to post 40961.3996296296 by cr-rrr-O53

|Insert 'See <a href="/Techref/io/stepper/power.htm">Stepper driver power supplies</a>' at: '<!-- 40961.3996296296 EOR -->'

<A TITLE="cr-rrr-O53" NAME="40961.3996296296" HREF="/techref/member/cr-rrr-O53/index.htm">cheung raychar</A> asks: <BLOCKQUOTE><A NAME="cr-rrr-O53">
</A> 
What dc voltage and ampere of power supply are required to push three Linistepper boards and three these motors (1.8ohm and 2A)? Are two 0.5ohm 4W resistors required in each board?  Thanks<BR>
</BLOCKQUOTE>




ON 20120222@1:41:25 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/faq.htm#40573.5512847222
James Newton[JMN-EFP-786] removed post 40573.5512847222

|Delete '<A TITLE="P-24.40.212.252" NAME="40573.5512847222" HREF="mailto:mgilbert@caisc.com">mgilbert@caisc.com</A> asks: <BLOCKQUOTE><A NAME="24.40.212.252">
</A> 
HELP! I am a chemict in SC trying to develop an automated dispenser using &quot;CNC&quot; type hardware and software. I have an &quot;XYZ&quot; positioner to move my dispensing tips to an opening at teh top of a vial, and I want to dispense 2 chemicals using stepper motors attached to a fluid metering pump. I have purchased Mach3 to use as software, and a 5 axis CNC driver (Univelop). The driver is malfuntioning already, and I want to replace it with something more robust. I like the look of your product.<BR>
My question is, can you help me wire this thing up to the computer and control the 5 stepper motors? Can you tell my which hardware combinations I'll need for the 5 motors? THANKS in advance!</BLOCKQUOTE>
<!-- 40573.5512847222 EOR -->

  <LI>'



ON 20120222@1:41:47 PM at page:
On a web page you were interested in at:
http://www.piclist.com/Techref/io/stepper/linistep/faq.htm#40573.5529166667
James Newton[JMN-EFP-786] removed post 40573.5529166667

|Delete '<A TITLE="P-24.40.212.252" NAME="40573.5529166667" HREF="mailto:mgilbert@caisc.com">mgilbert@caisc.com</A> asks: <BLOCKQUOTE><A NAME="24.40.212.252">
</A> 
HELP! I am a chemict in SC trying to develop an automated dispenser using &quot;CNC&quot; type hardware and software. I have an &quot;XYZ&quot; positioner to move my dispensing tips to an opening at the top of a vial, and I want to dispense 2 chemicals using stepper motors attached to a fluid metering pump. I have purchased Mach3 to use as software, and a 5 axis CNC driver (Univelop). The driver is malfuntioning already, and I want to replace it with something more robust. I like the look of your product.<BR>
My question is, can you help me wire this thing up to the computer and control the 5 stepper motors? (Vexta 2 phase 24VDC a AMP) Can you tell my which hardware combinations I'll need for the 5 motors? THANKS in advance!</BLOCKQUOTE>
<!-- 40573.5529166667 EOR -->

   <LI>'



ON 20120224@2:00:38 PM at page:
On a web page you were interested in at:
http://www.piclist.com/io/stepper/linistep/4axis5build.htm#40963.1775694444
James Newton[JMN-EFP-786] Published and replied to post 40963.1775694444

|Insert 'Based on your feedback and others, we've added a relay option kit and parts list. For the parts list, just scroll up to the "Options" listing and then to the bottom of that section.' at: '<!-- 40963.1775694444 EOR -->'

<A TITLE="P-194.71.15.242" NAME="40963.1775694444"> </A> Since there is no
    available kits for the relay driver, is it possible to get a parts list at
    least?<BR>
    
|Delete 'P-' before: '<!-- 40963.1775694444 EOR -->' but after: '<A TITLE="'.



ON 20120224@2:01:01 PM at page:
On a web page you were interested in at:
http://www.sxlist.com/language/hpgl/commands.htm#40962.9184259259
James Newton[JMN-EFP-786] removed post 40962.9184259259

|Delete '<A TITLE="P-200.100.125.188" NAME="40962.9184259259">
</A> 
Internet still alive (and kicking), too much thanks. Yours, Cunha.<!-- 40962.9184259259 EOR -->

   <LI>'



ON 20120225@9:03:04 PM at page:
On a web page you were interested in at:
http://www.piclist.com/atmel/avr/languages.htm#40964.7637962963
James Newton[JMN-EFP-786] published post 40964.7637962963

<A TITLE="P-69.248.172.111" NAME="40964.7637962963">
</A> 
look at 328eforth at offete.com