ON 20050207@7:39:25 AM at page:
http://www.piclist.com/readmodwrite.htm#38390.1670833333
James Newton[JMN-EFP-786] published post 38390.1670833333

<A TITLE="P-165.228.132.11" NAME="38390.1670833333" HREF="mailto:brett@hill.kyne.com.au">brett@hill.kyne.com.au</A> asks: <BLOCKQUOTE><A NAME="165.228.132.11">
</A> 
I'm trying to invert a port on a 16F628A. I'm trying the following:<BR>
COMF PORTA,F<BR>
Given that nothing has happened on the port just prior to this command, should it work? It just sends the port high regardless of what was on it.<BR>
I've also tried using a shadow register and an XOR instruction with all 1's which did the opposite (port went low). Any suggestions would be great!</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 38390.1670833333 EOR -->' but after: '<A TITLE="'.



ON 20050213@2:53:21 PM at page:
http://192.168.0.14/techref/servfail.htm#38396.6203703704
James Newton[JMN-EFP-786] Says

2005 02/12 "HTTP 1.1 Application Restarting" started about 23:00 and continued even after the regular restart a few hours later. I finally drove in to the office at around 14:00 on the 13th. I started and stoped the site, tried to stop the web service (not responding) and restarted the PC. Still the same. And then I realized that I had been editing an include file used by default.asp from another PC via the network and had left that file open. I close it and suddenly all was well. Apparently, IIS was trying to rebuild the application and couldn't get access to that file because it was locked by the other PC? Just my guess. Note to self: Don't leave important files open!



ON 20050213@2:54:31 PM at page:
http://192.168.0.14/techref/servfail.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://192.168.0.14/techref/diff.asp?url=H:\techref\servfail.htm&version=1



ON 20050213@2:56:21 PM at page:
http://192.168.0.14/techref/servfail.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://192.168.0.14/techref/diff.asp?url=H:\techref\servfail.htm&version=2



ON 20050213@8:19:38 PM at page:
http://techref.massmind.org/techref/robotics.htm#38396.8469675926
James Newton[JMN-EFP-786] See also:
http://mapage.noos.fr/chrismaker/air-muscle.htm
Air Muscles from ballon and cable organizer sleeve



ON 20050215@8:51:48 AM at page:
http://192.168.0.14/techref/win31s.htm#38398.3693055556
James Newton[JMN-EFP-786] See also:
http://www.sysinternals.com/
Fantastic resource for information and freeware utilities.

ERROR: Can't email. 553 Invalid address syntax




ON 20050215@8:52:54 AM at page:
http://192.168.0.14/techref/win31s.htm#38398.3700694444
James Newton[JMN-EFP-786] Says
/techref/apps.htm
techref - Software - Applications

ERROR: Can't email. 553 Invalid address syntax




ON 20050223@1:31:52 PM at page:
http://www.sxlist.com/lcds.htm#38405.9247569444
James Newton[JMN-EFP-786] published post 38405.9247569444

<A TITLE="P-217.219.15.3" NAME="38405.9247569444">
</A> 
HELLO ...<BR>
-------------------------------------------------<BR>
NAME:SASAN KEIVANDARIAN<BR>
EDU.:ELECTRICAL ENGINEAR<BR>
ADD.:SASAN_ELEC@IRANGATE.NET<BR>
-------------------------------------------------------------<BR>
THANK YOU VERY MUCH FOR YOUR GOOD INFORMATION IN YOUR USEFUL<BR>
WEBSIGHT.<BR>
---- ---- ---- ---- ---- ---- ---- --- --- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- <BR>
I have a question about use of CGM12864B-5B graphic L.c. display<BR>
I think this type of LCDs uses HD61202 controller.I want use this LCD<BR>
in my final projet (power/energy  meter) and I have basic driver of T6963 base<BR>
LCD in bascom AVR basic compiler.I dont know ,can I use this driver(program)<BR>
for HD61202 base LCDs? and what is the pin configuration  and changes in program?<BR>
I want change font table and use big font in my project.<BR>
if this is possible ,please guide me!<BR>
thanks alot for your consideration.
|Delete 'P-' before: '<!-- 38405.9247569444 EOR -->' but after: '<A TITLE="'.



ON 20050226@11:50:15 PM at page:
http://techref.massmind.org/techref/methods.htm#
David A Cary[DAV-MP-E62a] edited the page. Difference:
http://techref.massmind.org/techref/diff.asp?url=H:\techref\methods.htm&version=0