ON 20060905@12:25:05 PM at page:
http://www.piclist.com/microchip/index.htm#38965.2940972222
James Newton[JMN-EFP-786] removed post 38965.2940972222

|Delete '<A TITLE="P-195.142.239.2" NAME="38965.2940972222" HREF="mailto:gyildirimoglu@aselsan.com.tr">gyildirimoglu@aselsan.com.tr</A> asks: <BLOCKQUOTE><A NAME="195.142.239.2">
</A> 
Hi! I am new in PIC design and I have to do a difficult thing for me. Another microprocessor will program 18LF8525. I want to use low power ICSP to avoid extra 5V. In this case I will not be able to use bulk erase. so what? is it so important? Is there any application note about the hardware and the protocol about this subject? Regards. Gurol.</BLOCKQUOTE>
<!-- 38965.2940972222 EOR -->

   <LI>'



ON 20060907@10:24:17 AM at page:
http://www.piclist.com/microchip/index.htm#38967.1205324074
James Newton[JMN-EFP-786] published post 38967.1205324074

<A TITLE="P-198.175.253.81" NAME="38967.1205324074" HREF="mailto:prince.parihar@gmail.com">prince.parihar@gmail.com</A> &quot;<A NAME="198.175.253.81">
</A> 
The Most general and popular PIC, PIC18 are Pipelined ...So on an avg 1 INS/Cycle..&quot;

|Delete 'P-' before: '<!-- 38967.1205324074 EOR -->' but after: '<A TITLE="'.



ON 20060910@8:41:43 PM at page:
http://www.piclist.com/microchip/devprogspeed.htm#38969.5857060185
James Newton[JMN-EFP-786] published post 38969.5857060185

<A TITLE="P-12.216.236.199" NAME="38969.5857060185">
</A> 
Here's data for the PICkit 2 v1.20 and pyk version 1.42 (on  64-bit Linux):<BR>
<BR>
10F206: 5.8 seconds<BR>
12F675: 5.1 seconds<BR>
16F876a: 50.0 seconds<BR>
18F2520: 39.6 seconds<BR>
<BR>
pyk performs one readback only.  The only M'chip references I could find for multi-voltage readback were for OTP parts.  pyk has code to do low-voltage readback, but it is not used because pyk doesn't support OTP parts.<BR>
<BR>
pyk doesn't filter out &quot;blank&quot; data, so the times are the same with blank data and random data.<BR>
<BR>
Regards,<BR>
Mark Rages<BR>
markrages@gmail
|Delete 'P-' before: '<!-- 38969.5857060185 EOR -->' but after: '<A TITLE="'.



ON 20060911@2:54:38 PM at page:
http://www.piclist.com/microchip/devprogspeed.htm#38971.3097453704
James Newton[JMN-EFP-786] published post 38971.3097453704

<A TITLE="P-217.169.5.1" NAME="38971.3097453704">
</A> 
<BR>
Using a PICkit2 (1 Verify) to program a 12F675, I get times of 10.6 seconds for both the full and empty cases.  This is using PICkit2 software version 1.21.<BR>
<BR>
Cheers,<BR>
Howard Winter<BR>

|Delete 'P-' before: '<!-- 38971.3097453704 EOR -->' but after: '<A TITLE="'.



ON 20060918@1:02:28 PM at page:
http://www.piclist.com/microchip/editors.htm#38977.7055555556
James Newton[JMN-EFP-786] published post 38977.7055555556

<A TITLE="P-71.194.85.214" NAME="38977.7055555556" HREF="http://pikdev.free.fr/" TARGET="_top">
http://pikdev.free.fr/</A> 
Pikdev a free IDE for PIC programming, has its own internal programmer software compatible with a wide range of hardware
|Delete 'P-' before: '<!-- 38977.7055555556 EOR -->' but after: '<A TITLE="'.



ON 20060921@4:00:16 PM at page:
http://www.piclist.com/microchip/pwmrescalc.htm#38981.6448263889
James Newton[JMN-EFP-786] removed post 38981.6448263889

|Delete '<A TITLE="P-196.219.247.117" NAME="38981.6448263889">
</A> 
ABCD<!-- 38981.6448263889 EOR -->

   <LI>'



ON 20060921@4:00:24 PM at page:
http://www.piclist.com/techref/microchip/pwmrescalc.htm#38918.4264467593
James Newton[JMN-EFP-786] removed post 38918.4264467593

|Delete '<A TITLE="P-61.1.221.209" NAME="38918.4264467593" HREF="mailto:tipanddot@sancharnet.in">tipanddot@sancharnet.in</A> asks: <A NAME="61.1.221.209">
</A> 
<!-- 38918.4264467593 EOR -->

   <LI>'



ON 20060926@2:24:59 PM at page:
http://www.piclist.com/microchip/devprogs.htm#38986.1676273148
James Newton[JMN-EFP-786] removed post 38986.1676273148

 with comment: 'should have posted this on <a href="http://www.piclist.com/techref/microchip/picstartplus.htm">http://www.piclist.com/techref/microchip/picstartplus.htm</a>'

|Delete '<A TITLE="P-213.255.236.86" NAME="38986.1676273148" HREF="mailto:charbel_semaan@hotmail.com">charbel_semaan@hotmail.com</A> asks: <BLOCKQUOTE><A NAME="213.255.236.86">
</A> 
hi , i have a usb to rs232 adapter and trying to use it with picstart plus and mpLab v 7.40 i have changed the port setting to 9600 baude + flow control hardware + uncheked FIFO but i m getting the floowing error in mplab :<BR>
&quot;PICSTART Plus not found. Please verify serial<BR>
connection and try the current operation again.<BR>
<BR>
A serial time out has occurred. Please verify your serial<BR>
connection and try again. &quot; <BR>
any help will be very appreciated</BLOCKQUOTE>
<!-- 38986.1676273148 EOR -->

  <LI>'



ON 20060929@10:51:43 AM at page:
http://www.piclist.com/microchip/index.htm#38989.3451967593
James Newton[JMN-EFP-786] removed post 38989.3451967593

 with comment: 'Sorry, no.'

|Delete '<A TITLE="P-165.161.3.12" NAME="38989.3451967593" HREF="mailto:lllliiiissssaaaa3@yahoo.com">lllliiiissssaaaa3@yahoo.com</A> asks: &quot;<A NAME="165.161.3.12">
</A> 
do u guys have models of microchips?&quot;
<!-- 38989.3451967593 EOR -->

   <LI>'