ON 20060829@3:26:55 PM at page:
http://www.piclist.com/techref/microchip/16F877/hvprog.htm#38958.6436921296
  [barry_newberger-amd-] Says

VPP, applied to the MCLR pin is 13.07V and rises in less than 200 ns.



ON 20060830@8:24:37 PM at page:
http://www.piclist.com/microchip/16F877/rs232-cr.htm#38959.3458101852
James Newton[JMN-EFP-786] published post 38959.3458101852

<A TITLE="P-80.189.7.211" NAME="38959.3458101852" HREF="mailto:basman.george@gmail.com">basman.george@gmail.com</A> asks: <BLOCKQUOTE><A NAME="80.189.7.211">
</A> 
I have a problem with using CCP pins for measuring time difference between two pulls signals where by timer1 will bee running free and CCP1capture is red throw CCPR1H-CCPR1L and CCP2 throw CCPR2H-CCPR2L complementing CCPR1H-CCPR1L and adding it to CCPR2H-CCPR2L after converting to ASCII and display on LCD the time measurement constantly flatcars with what looks like a random number and back to accurate measurement<BR>
Welcome any suggestions<BR>
Thanks Boz   <BR>
</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 38959.3458101852 EOR -->' but after: '<A TITLE="'.