ON 20030514@2:26:07 PM at page:
http://www.piclist.commicrochip/16f877/setup.htm
JMN-EFP-786 James Newton removed post 37753.9545486111

|Delete '<A TITLE="P-202.88.226.182" NAME="37753.9545486111" HREF="mailto:ananthanmattathil@yahoo.com">ananthanmattathil@yahoo.com</A> asks: &quot;<A NAME="202.88.226.182">
</A> 
HELLOW HOW CAN I CLEAR MY DOUBTS ONLINE WITH THIS PICLIST.COM?&quot;
<!-- 37753.9545486111 EOR -->'

ON 20030518@8:47:54 AM at page:
http://www.piclist.commicrochip/16F877/taitlinux.htm
JMN-EFP-786 James Newton published post 37757.9060416667

<A TITLE="P-66.167.161.140" NAME="37757.9060416667" HREF="mailto:vettemph@yahoo.com">vettemph@yahoo.com</A> <BLOCKQUOTE><A NAME="66.167.161.140" HREF="/techref/microchip/16F877/taitlinux.htm" TARGET="_top">
/techref/microchip/16F877/taitlinux.htm</A> 
I believe this concept is missing something. I have never programmed a pic before but i have been doing alot of reading and will sone do so, anyway, This post claims that connecting pin 5 from the cable to RB3 will be enough to enter programming mode for LVP. (pin 5 used to control 13 volts to Vdd for HVP) The Microchip programming guide states that to enter LVP you must set RB3 to Vdd, Then set /MCLR to Vdd. the cable described in this post (and assocciated software???) does not mention /MCLR. what should i do?<BR>
BTW I made a DIA circuit of the infomation thus far and will update and post it when all is fixed.</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 37757.9060416667 EOR -->' but after: '<A TITLE="'.