PCL5 REVERSE PATTERN TEXT
Legend: Ec = [Ctrl] [P] [Esc] in DOS EDIT
The following section will provide the required printer
commands for reverse pattern text on the LaserJet III
and LaserJet 4 Family Printer.
EcE Resets the printer.
Ec*p750y450X Vertical Cursor
positioning command moves
the cursor to the new
position of 750 dots
along the vertical axis.
Horizontal cursor
positioning command moves
the cursor 450 dots along
the horizontal axis.
Ec*c1500A Specifies a rectangle
width of 1500 dots.
Ec*c1500B Specifies a rectangle
height of 1500 dots.
Ec*c0P Specifies Solid Black
fill of the rectangle.
Ec*v0N Specifies the characters
and character cells as
transparent so the black
background will appear
behind the characters.
Ec*v1O Specifies that the
characters be printed in
an opaque mode.
Ec*c1G Specifies the cross-hatch
pattern to be used in the
characters.
Ec*v3T Allows the character to
be printed as cross hatch
characters rather than
black characters.
Ec(s1p30v0s0b4101T Specifies a
proportionally spaced 30
point, upright, medium
stroke weight, CG Times.
Ec*p1500y713X Specifies cursor
positioning 1500 dots in
the vertical position and
713 dots in the
horizontal position.
Reverse Pattern Text TEXT
EcE Ejects the page and
resets the printer.
Copyright Hewlett-Packard Co. 1993
The information contained herein is subject to change
without notice.
Hewlett-Packard shall not be liable for incidental or
consequential damages in connection with the use of this
material.
Comments: