Contributor: GREG VIGNEAULT (* System reset via software... Using a jump to address $FFFF:0000 doesn't always work to reboot a system, particularly under multi-taskers. In a Windows 3.1 DOS- session I get a dialog box, about a system violation, that tells me to shut down all applications and restart the system -- but my PC is certainly not reset by the software reboot attempt. AT-class systems ('286+) have a system controller IC which can be instructed to reset the system. This will force a reboot even under Windows. The following TP code illustrates this process. Since this type of reset will interrupt all other processes, it's important that an application first close all files and flush all buffers. It would also be a good idea to ask the user if a entire system reset is okay. Use this "power reset" prudently! ... *) (*******************************************************************) PROGRAM Reboot; { TP system reboot: Jul.19.94 Greg Vigneault } PROCEDURE SoftReset; { software reset for PC/XTs } BEGIN { invalid for multi-taskers } InLine( $2B/$C0/ { sub ax, ax } $8E/$C0/ { mov es, ax } $26/$C7/6/$72/4/$34/$12/ { mov es:[472h],1234h } $EA/0/0/$FF/$FF); { jmp 0FFFFh:0000h } END {SoftReset}; PROCEDURE HardReset; { hardware reset for '286+ } BEGIN { (uses system controller) } InLine( $B0/$FE/ { mov al, 0FEh } $E6/$64); { out 64h, al } END {HardReset}; BEGIN {Reboot} WriteLn; WriteLn('POWER RESET courtesy Greg Vigneault...'); HardReset; { if we're still running then the system is probably a PC/XT... } SoftReset; END {Reboot}. { Internet(Greg.Vigneault@westonia.com) Fido(1:250/636) } (*******************************************************************)