ON 20051128 at page:
http://www.massmind.org/techref/io/stepper/wires.htm
someone[--] edited the page. Difference:
"R:\bak\H\techref\io\stepper\wires.htm.20051128.dif"
ON 20051130@11:06:20 AM at page:
http://www.piclist.com/techref/io/stepper/wires.htm#
James Newton[JMN-EFP-786] edited the page. Difference:
http://www.piclist.com/techref/diff.asp?url=H:\techref\io\stepper\wires.htm&version=15
ON 20051130@11:10:34 AM at page:
http://www.piclist.com/io/stepper/wires.htm#38684.7725
James Newton[JMN-EFP-786] Published and replied to post 38684.7725 by michaelh
|Insert 'Yes, they were wrong, thank you for pointing that out. I've corrected them now, please let me know if these are again correct. ' at: ''
michaelh@iae.nl asks:
http://www.qsl.net/pe1rok
It seems to me that the coils are labelled correctly, but placed wrong. A1 and A2 are each other's opposite instead of neighbors. On the 'steppers.htm' page it is right. On this page (wires.htm) it is not drawn right.
The recipe to identify the wires is helpful. I may add that identifying wires with six (or 5-wire) motors the ohmmeter method is the easiest. Who really cares about the sequence. If it is not right, swap a1 and a2, or b1 and b2.
|Delete 'P-' before: '' but after: '