ON 20100205@3:44:01 PM at page:
On a web page you were interested in at:
http://www.piclist.org/io/stepper/linistep/faq.htm#40211.7221412037
James Newton[JMN-EFP-786] Published and replied to post 40211.7221412037 by charlton_dial

|Insert 'I would not recommend changing the capacitors. The PMinMO interface works just fine, the only difference is that what PMinMO uses as an enable line, we use as a low power line, so if you "disable" the stepper, it will still step, at low power.' at: '<!-- 40211.7221412037 EOR -->'

<A TITLE="P-125.164.200.127" NAME="40211.7221412037" HREF="mailto:charlton_dial@yahoo.com">charlton_dial@yahoo.com</A> asks: <BLOCKQUOTE><A NAME="125.164.200.127">
</A> 
Hi, I'm a newbie. I would like to ask could I exchange the tantalum capacitors with the electro-axial one? and also, does anyone has tried to use the linistepper with 4-axis opto-interface from PMinMo? Does it work? Thanks</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 40211.7221412037 EOR -->' but after: '<A TITLE="'.



ON 20100205@3:44:24 PM at page:
On a web page you were interested in at:
http://www.piclist.org/techref/io/stepper/linistep/faq.htm#40072.5271064815
James Newton[JMN-EFP-786] Published and replied to post 40072.5271064815 by rickk1

|Insert 'That is exactly right.' at: '<!-- 40072.5271064815 EOR -->'

<A TITLE="P-24.117.70.203" NAME="40072.5271064815" HREF="mailto:rickk1@cableone.net">rickk1@cableone.net</A> asks: <BLOCKQUOTE><A NAME="24.117.70.203">
</A> 
From the above, I understand that I can use the driver kit with the 555 kit to drive a 6 wire unifilar motor in a stand alone configuration. Am I correct in this? Thank you for your time.<BR>
<BR>
Rick Kernell</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 40072.5271064815 EOR -->' but after: '<A TITLE="'.



ON 20100219@4:47:54 PM at page:
On a web page you were interested in at:
http://www.piclist.com/io/stepper/linistep/4axis3build.htm#40228.4279050926
James Newton[JMN-EFP-786] removed post 40228.4279050926

|Delete '<A TITLE="P-74.170.245.189" NAME="40228.4279050926" HREF="mailto:Rbeckett@bellsouth.net">Rbeckett@bellsouth.net</A> asks: <BLOCKQUOTE><A NAME="74.170.245.189">
</A> 
Can you add the power supply regulator parts to my order?  I just realized I missed it during my initial order and it is neccessary for making my project work.   Thanks!!!<BR>
Bob</BLOCKQUOTE>
<!-- 40228.4279050926 EOR -->

  <LI>'



ON 20100223@10:26:46 AM at page:
On a web page you were interested in at:
http://www.piclist.com/io/stepper/linistep/faq.htm#40231.2852662037
James Newton[JMN-EFP-786] Published and replied to post 40231.2852662037 by ckaross

|Insert 'The Linistepper shouldn't have any problem at all with those motors. You should probably adjust the sense resistors to increase the drive to 2 amps. Running the extra current is unlikely to be a problem since the motor voltage is low, especially if you use a lower voltage supply. I would recommend a 9 volt supply instead of 12.' at: '<!-- 40231.2852662037 EOR -->'

<A TITLE="P-71.74.135.75" NAME="40231.2852662037" HREF="mailto:ckaross@neo.rr.com">ckaross@neo.rr.com</A> asks: <BLOCKQUOTE><A NAME="71.74.135.75">
</A> 
I am building a light CNC machine for PCB milling, and plan to use Linistepper contolllers to drive 3 Vexta PK266-02A motors that I already have. I am a little concerned that this controller may be  marginal for use with the Vexta motors that are rated at 2A per phase @ 3.6V in unipolar mode. I plan to use a 12V supply yet to be built or acquired. I see this motor on the &quot;recommended&quot; list, and was wondering if anyone has had success with this combination.<BR>
Thanks,<BR>
Charles K</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 40231.2852662037 EOR -->' but after: '<A TITLE="'.



ON 20100225@3:40:52 PM at page:
On a web page you were interested in at:
http://www.piclist.org/io/stepper/linistep/index.htm#40234.3687615741
James Newton[JMN-EFP-786] removed post 40234.3687615741

|Delete '<A TITLE="P-212.72.106.12" NAME="40234.3687615741" HREF="mailto:eslavko@gmail.com">eslavko@gmail.com</A> &quot;<A NAME="212.72.106.12">
</A> 
Hello....<BR>
<BR>
I'm confused on that design. There are NO frewheel diodes. So power transistor's are under great stress. I'm already blew few TIP122's&quot;
<!-- 40234.3687615741 EOR -->

  <LI>'