ON 20090317@5:14:33 AM at page:
On a web page you were interested in at:
http://www.piclist.com/techref/io/stepper/linistep/index.htm#39889.2183796296
Carlos  Gasparinho[CG-mac-a86] Questions:

I am putting  together 3 linnisteppers and a 4 axis/555 board with the pcbs and kit that I have just received. (Thank you for the good service)<BR>
<BR>
Now I have one question:<BR>
<BR>
Can I use them directly with a unipolar 0.9 degree step motor, or will I have to change the code?<BR>
If so where should I start?<BR>
<BR>
Thank you and best regards from far away Portugal.



ON 20090317@9:41:47 AM at page:
On a web page you were interested in at:
http://www.piclist.com/techref/io/stepper/linistep/index.htm#39889.2183796296
James Newton[JMN-EFP-786] Replied to post 39889.2183796296 by CG-mac-a86

|Insert 'The Linistepper doesn't care how many degree's the motor steps, it just moves it to the next step. What ever system is providing the step pulses will need to deal with how far the motor rotates for each step.' at: '<!-- 39889.2183796296 EOR -->'

<A TITLE="CG-mac-a86" NAME="39889.2183796296" HREF="/techref/member/CG-mac-a86/index.htm">Carlos  Gasparinho</A> asks: <BLOCKQUOTE><A NAME="CG-mac-a86">
</A> 
I am putting  together 3 linnisteppers and a 4 axis/555 board with the pcbs and kit that I have just received. (Thank you for the good service)<BR>
<BR>
Now I have one question:<BR>
<BR>
Can I use them directly with a unipolar 0.9 degree step motor, or will I have to change the code?<BR>
If so where should I start?<BR>
<BR>
Thank you and best regards from far away Portugal.</BLOCKQUOTE>




ON 20090330@4:35:18 PM at page:
On a web page you were interested in at:
http://www.piclist.com/io/stepper/linistep/index.htm#39901.7528356481
James Newton[JMN-EFP-786] removed post 39901.7528356481

|Delete '<A TITLE="P-203.171.93.222" NAME="39901.7528356481"> </A> where are the bill
    of materials for the kits (4axis/555/printer)??<!-- 39901.7528356481 EOR
    -->'