ON 20081207@7:47:05 PM at page:
http://www.piclist.com/io/stepper/linistep/index.htm#39788.8114467593
James Newton[JMN-EFP-786] removed post 39788.8114467593

|Delete '<A TITLE="P-85.97.32.118" NAME="39788.8114467593" HREF="mailto:kartal93th@yahoo.com">kartal93th@yahoo.com</A> asks: <BLOCKQUOTE><A NAME="85.97.32.118">
</A> 
very good project!<BR>
I have a question, I have a final porject whcih is controlling heater and mixing motor.<BR>
It means I want to make tempreture constantly in box and same time my low speed (stepper) mixing motor must turn right and then left(but motor's turning speed and turning ways must be programmable)<BR>
Do you have a source code and circuit?<BR>
Really I tried some tempreture circuits but when I add a mixing motor all things are going bad in my final project....<BR>
kartal93th@yahoo.com</BLOCKQUOTE>
<!-- 39788.8114467593 EOR -->

   <LI>'



ON 20081207@7:47:19 PM at page:
http://www.piclist.com/io/stepper/linistep/index.htm#39788.8104513889
James Newton[JMN-EFP-786] removed post 39788.8104513889

|Delete '<A TITLE="P-85.97.32.118" NAME="39788.8104513889">
</A> 
very good project!<BR>
I have a question, I have a final porject whcih is controlling heater and mixing motor.<BR>
It means I want to make tempreture constantly in box and same time my low speed (stepper) mixing motor must turn right and then left(but motor's turning speed and turning ways must be programmable)<BR>
Do you have a source code and circuit?<BR>
Really I tried some tempreture circuits but when I add a mixing motor all things are going bad in my final project....<!-- 39788.8104513889 EOR -->

  <LI>'



ON 20081225@1:46:37 PM at page:
http://www.piclist.com/io/stepper/linistep/index.htm#39806.8522800926
James Newton[JMN-EFP-786] removed post 39806.8522800926

|Delete '<A TITLE="P-193.227.14.64" NAME="39806.8522800926" HREF="mailto:field_email@gmail.com">field_email@gmail.com</A> &quot;<A NAME="193.227.14.64">
</A> 
http://www.message_droner.com/&quot;
<!-- 39806.8522800926 EOR -->

  <LI>'



ON 20081226@11:54:56 PM at page:
http://www.sxlist.com/io/stepper/linistep/index.htm#39808.9796759259
James Newton[JMN-EFP-786] removed post 39808.9796759259

|Delete '<A TITLE="P-68.61.191.58" NAME="39808.9796759259" HREF="mailto:mukongol@msu.edu">mukongol@msu.edu</A> asks: <BLOCKQUOTE><A NAME="68.61.191.58">
</A> 
I am trying to use your driver with a National Instruments USB 6501 digital I/O device and Labview software. I have been working on this project for a couple of months now and I haven't been successful at getting my 12V stepper motors to work. I'm I using the wrong devices with your driver?</BLOCKQUOTE>
<!-- 39808.9796759259 EOR -->

   <LI>'