ON 20080514@2:02:50 PM at page: http://www.piclist.com/io/stepper/linistep/index.htm#39582.3530092593 James Newton[JMN-EFP-786] removed post 39582.3530092593 |Delete 'wilsonclocks@gmail.com asks:
Could someone sell me a couple of these pre-programmed pic chips? (Don't accedintally put 12v to the board instead of 5v.)
I need two. Thanks, Phil email:wilsonclocks@gmail.com
  • ' ON 20080516@4:07:04 PM at page: http://www.piclist.com/techref/io/stepper/linistep/4axis2build.htm# James Newton[JMN-EFP-786] edited the page. Difference: http://www.piclist.com/techref/diff.asp?url=H:\techref\io\stepper\linistep\4axis2build.htm&version=0 ON 20080527@11:29:09 AM at page: http://www.piclist.com/io/stepper/linistep/index.htm#39595.1478703704 James Newton[JMN-EFP-786] removed post 39595.1478703704 |Delete 'hal2000jc@hmail.com asks:
    Hello James
    We congratulate you on your work
    Forgive my bad English
    I am Spanish live in Madrid Spain

    I'm interested in your controller

    http://zuiderzeemuseum.netfirms.com/url5.php?url=http://www.piclist.com/techref/io/stepper/linistep/index.htm

    But I have doubts

    For me it is very important, achieving a smooth linear motion and precision
    The maximum speed would be 250 laps per minute or rarely 500 laps.
    Above all movements slow

    So I think that your controller is good

    I No to understand how it works
    Does it work with micro steps?
    Is it like an audio signal?

    I use for these engines

    http://www.cenece.com/zip/motores%20de%20pasos.pdf



    If this controlling is good, I would be interested to buy 4 plates
    Does your selling plates and components, but unassembled?

    I am in Europe, Spain

    Does your material could mandar to my house?
    How much would? $

    I appreciate your time.

    A greeting
    Juan Carlos Velazquez
  • '