ON 20070706@10:12:37 AM at page:
http://www.piclist.com/io/stepper/linistep/index.htm#39269.2210763889
James Newton[JMN-EFP-786] removed post 39269.2210763889

|Delete '<A TITLE="P-77.46.176.177" NAME="39269.2210763889">
</A> 
Is there a complete PCB layout available for the stepper motor drivers and control board (not just the component placement)? Thanx!<BR>
<BR>
Eddie<!-- 39269.2210763889 EOR -->

  <LI>'



ON 20070716@10:16:46 AM at page:
http://www.piclist.org/techref/io/stepper/linistep/faq.htm#39279.1733912037
James Newton[JMN-EFP-786] Published and replied to post 39279.1733912037 by MG-info-

|Insert 'The A is backward compatible so it should work fine. Since nothing is timing critical, the crystal should also be ok.' at: '<!-- 39279.1733912037 EOR -->'

<A TITLE="P-MG-info-" NAME="39279.1733912037" HREF="/techref/member/MG-info-/index.htm">Mel  Guevarra</A> asks: <BLOCKQUOTE><A NAME="MG-info-">
</A> 
hi all,<BR>
<BR>
i have posted this question on another page, and i am posting it here again.<BR>
<BR>
will the source code work with the newer PIC16F628A? anything that i should change in the source code.  not a pic programmer myself, just a newbie.  what do i need to change in the source code?<BR>
<BR>
also, can i use a 20MHz crystal instead of the 16MHz? do i have to change anything on the source code? if so what will it be?<BR>
<BR>
sorry for asking too much.<BR>
<BR>
thanks in advance.<BR>
<BR>
mel guevarra<BR>
</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 39279.1733912037 EOR -->' but after: '<A TITLE="'.



ON 20070716@10:18:01 AM at page:
http://www.piclist.org/io/stepper/linistep/mods.htm#39279.1599652778
James Newton[JMN-EFP-786] removed post 39279.1599652778

 with comment: 'Answered elsewhere'

|Delete '<A TITLE="P-203.84.183.134" NAME="39279.1599652778" HREF="mailto:melrg@info.com.ph">melrg@info.com.ph</A> asks: <BLOCKQUOTE><A NAME="203.84.183.134">
</A> 
hi all, <BR>
<BR>
LINISTEPPER<BR>
<BR>
i wanna try this controller out. however, i only have with me a 16F628A-I/P pic chip as opposed to the 16F628 required.<BR>
<BR>
i am not really much into programming, any thing that i should look out for in using the hex file included in the website?<BR>
<BR>
also, is it possible to use a 20MHz osc over the 16MHz, do i have to change anything on the source code to make this possible.<BR>
<BR>
need your help on this guys, i am just a newbie, tinkering with pics. <BR>
<BR>
thanks in advance.<BR>
<BR>
mel guevarra</BLOCKQUOTE>
<!-- 39279.1599652778 EOR -->
</UL>'



ON 20070716@10:47:39 AM at page:
http://www.piclist.org/techref/io/stepper/linistep/faq.htm#39279.1733912037
Mel  Guevarra[MG-info-] Replied to post 39279.1733912037 by MG-info-

|Insert 'hi!

thanks then.  at the moment i am populating my breadboard and will  test it with a 555 as signal source like how you are doing things.

will post on here the results. thanks again.

mel' at: '<!-- 39279.1733912037 EOR -->'

<A TITLE="MG-info-" NAME="39279.1733912037" HREF="/techref/member/MG-info-/index.htm">Mel  Guevarra</A> asks: <BLOCKQUOTE><A NAME="MG-info-">
</A> 
hi all,<BR>
<BR>
i have posted this question on another page, and i am posting it here again.<BR>
<BR>
will the source code work with the newer PIC16F628A? anything that i should change in the source code.  not a pic programmer myself, just a newbie.  what do i need to change in the source code?<BR>
<BR>
also, can i use a 20MHz crystal instead of the 16MHz? do i have to change anything on the source code? if so what will it be?<BR>
<BR>
sorry for asking too much.<BR>
<BR>
thanks in advance.<BR>
<BR>
mel guevarra<BR>
</BLOCKQUOTE>
<!-- REPLY --> <A TITLE="JMN-EFP-786" NAME="39279.4283101852" HREF="/techref/member/JMN-EFP-786/index.htm">James Newton</A> replies: <I>The A is backward compatible so it should work fine. Since nothing is timing critical, the crystal should also be ok.</I><!-- 39279.4283101852 EOR --><P>



ON 20070723@10:31:48 AM at page:
http://www.piclist.com/io/stepper/linistep/lini_tun.htm#39286.1109259259
James Newton[JMN-EFP-786] removed post 39286.1109259259

|Delete '<A TITLE="P-66.178.22.82" NAME="39286.1109259259">
</A> 
i have in lab to control a big fire fighter tube ,i want to know if there is<!-- 39286.1109259259 EOR -->

   <LI>'