ON 20050620@1:10:05 PM at page:
http://www.piclist.com/io/stepper/linistep/index.htm#38523.0999652778
James Newton[JMN-EFP-786] removed post 38523.0999652778

|Delete '<A TITLE="P-82.140.157.49" NAME="38523.0999652778">
</A> 
Are PCB files of Linistepper available  ? I'd like to build one. <BR>
<!-- 38523.0999652778 EOR -->

  <LI>'



ON 20050622@1:42:02 PM at page:
http://www.piclist.com/io/stepper/linistep/lini.htm#38524.8718634259
James Newton[JMN-EFP-786] removed post 38524.8718634259

|Delete '<A TITLE="P-69.140.104.212" NAME="38524.8718634259" HREF="mailto:timavv@aol.com">timavv@aol.com</A> asks: <BLOCKQUOTE><A NAME="69.140.104.212">
</A> 
I've run into a problem with the LiniStepper board. No problem at all assembling it, but it drives the motors I've connected to it with 3 steps forward, then 1 step back, then repeat.  I've tested all diode orientations, resistor values, shorts between heat sink and power units, etc.<BR>
There were a couple of things tht weren't clear, and maybe this is the problem: the orientation of the blob capacitors.  <BR>
I have C5 and C6 with the printing toward the 5W resistors;<BR>
C2 and C4 with the printing away from the PIC;<BR>
C3 with the printing toward the PIC.<BR>
<BR>
Any hints on what to look for next?  Thanks,<BR>
<BR>
Tim Iafolla</BLOCKQUOTE>
<!-- 38524.8718634259 EOR -->

   <LI>'



ON 20050624@11:21:35 AM at page:
http://www.piclist.com/io/stepper/linistep/lini_wks.htm#38526.2556365741
James Newton[JMN-EFP-786] removed post 38526.2556365741

|Delete '<A TITLE="P-68.91.99.35" NAME="38526.2556365741" HREF="mailto:acpdramirez@yahoo.com">acpdramirez@yahoo.com</A> asks: &quot;<A NAME="68.91.99.35">
</A> 
Will this work with engraving tables as Dalhgren or Vanguard??&quot;
<!-- 38526.2556365741 EOR -->

   <LI>'