ON 20040708@1:50:19 PM at page: http://techref.massmind.org/techref/io/d2a.htm#38176.5765972222 James Newton[JMN-EFP-786] See also: http://www.beis.de/Elektronik/DeltaSigma/DeltaSigma.html a delta sigma converter, which was invented by Philips in the 60's ON 20040711@10:08:58 PM at page: http://techref.massmind.org/techref/io/steppers.htm#38179.9228935185 James Newton[JMN-EFP-786] Says http://techref.massmind.org/techref/io/quickstep.htm ON 20040711@10:09:32 PM at page: http://techref.massmind.org/techref/io/steppers.htm#38179.923287037 James Newton[JMN-EFP-786] Says /techref/io/quickstep.htm QuickStep ON 20040711@10:10:28 PM at page: http://techref.massmind.org/techref/io/quickstep.htm#38179.9239351852 James Newton[JMN-EFP-786] Says I've transcribed it to a standard list:
Qty Type Part Spec Form
------- ----------- ------- --------------- -----------------------
1 uC IC2 PIC '877 DIP
1 socket IC2s 40 PIN 0.6" DIP
12 transistor Q1-Q12 MOSFET N 60V 5A 2-7B1B
Populate the FETs Q1–12 with the tab above the white bar.
1 transistor Q13 NPN BJT TO-92
600ma 40V
Installed with the flat side as indicated on the PCB
1 capacitor C1 1000u 50V 5mm lead spacing
1 capacitor C2 10u 25V 2mm lead spacing
The polarized capacitors with the plus sign on the same side as the plus sign silkscreened on the board.
2 capacitor C3,C5 22p 100V 6.35mm lead spacing
Little dull brown disk
1 capacitor C4 0u1 50V 5mm lead spacing
Really little shiny brown disk
13 resistor R1-12, 1k 5% 1/4W
R17 brown-black-red-gold
1 resistor R13 10k 5% 1/4W
brown-black-orange-gold
2 resistor R14,R15 330 5% 1/4W
orange-orange-brown-gold
1 resistor R16 5.1R 5% 5W
WIREWOUND Additional units included to tune certain stepper motors. Ignore extras.
1 osc XT1 4 MHz HC-49
14 diode D1-12, 800V max DO41
D13,D14
The diodes are installed with the band above the white band,
1 LED LED1 clear, 3mm T1
Place the longer lead of LED1 in the hole marked with a plus sign.
5 terminal X1-3, 3pin terminal 0.2" SIP screw
Y1-3, strip
Z1-3
The screw terminal blocks feature a dovtailed protrusion on one side and a dovetailed slot on the other; assemble five 3-terminal blocks together for the
connections to the motor
1 header SV6 pin header 0.1" SIP
1 connector SV8 HD, M 4pin Pwr 0.2" SIP
The connectors SV9 and SV10 are for future expansion and for in-circuit programming; they are not necessary for normal ON 20040711@10:15:07 PM at page: http://techref.massmind.org/techref/io/quickstep.htm# James Newton[JMN-EFP-786] edited the page. Difference: http://techref.massmind.org/techref/diff.asp?url=H:\techref\io\quickstep.htm&version=1 ON 20040711@10:27:44 PM at page: http://techref.massmind.org/techref/io/quickstep.htm# James Newton[JMN-EFP-786] edited the page. Difference: http://techref.massmind.org/techref/diff.asp?url=H:\techref\io\quickstep.htm&version=2 ON 20040711@10:40:25 PM at page: http://techref.massmind.org/techref/io/quickstep.htm# James Newton[JMN-EFP-786] edited the page. Difference: http://techref.massmind.org/techref/diff.asp?url=H:\techref\io\quickstep.htm&version=3