ON 20101203@2:00:13 PM at page:
On a web page you were interested in at:
http://www.massmind.org/app/PWB_release.htm#40514.7088773148
James Newton[JMN-EFP-786] published post 40514.7088773148

<A TITLE="P-203.96.1.46" NAME="40514.7088773148" HREF="mailto:anna.m@clear.net.nz">anna.m@clear.net.nz</A> <BLOCKQUOTE><A NAME="203.96.1.46" HREF="http://www.pwrtrnx.com" TARGET="_top">
http://www.pwrtrnx.com</A> 
Converting gerber files output from other pcb layout packages to protel 2.8 files.  Go to   Pwrtrnx.com  they offer a service -  I tried it - it works..!</BLOCKQUOTE>

|Delete 'P-' before: '<!-- 40514.7088773148 EOR -->' but after: '<A TITLE="'.



ON 20101218@12:31:36 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/app/cncs.htm#37973.0733680556
James Newton[JMN-EFP-786] removed post 37973.0733680556

|Delete '<A TITLE="P-202.56.198.154" NAME="37973.0733680556" HREF="mailto:vemaraju_sireesha@yahoo.co.in">vemaraju_sireesha@yahoo.co.in</A>
    asks: <A NAME="202.56.198.154"> </A> <!-- 37973.0733680556 EOR -->
</UL>'



ON 20101218@12:31:51 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/app/cncs.htm#40530.0221180556
James Newton[JMN-EFP-786] See also:
http://www.lumenlab.com/d/gcode/cnc-g-code-tutorial
Nice little G-Code tutorial



ON 20101218@11:52:23 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/Techref/app/cncs.htm#37917.9328472222
James Newton[JMN-EFP-786] Replied to post 37917.9328472222 by http://linuxcnc.org
	TARGET=_top

|Insert 'Source code at <a href="http://git.linuxcnc.org/gitweb?p=emc2.git;a=tree;f=src/emc/kinematics;hb=master">http://git.linuxcnc.org/gitweb?p=emc2.git;a=tree;f=src/emc/kinematics;hb=master</a>, the actual calculations of movement appear to be in the file tp.c (Trajectory planner)' at: '<!-- 37917.9328472222 EOR -->'

<A TITLE="12.177.10.114" NAME="37917.9328472222" HREF="http://linuxcnc.org"
	TARGET="_top">http://linuxcnc.org</A>
    <PRE>EMC, Enhanced Machine Controller.  Free, open source CNC control which runs on linux (with a real-time extension) - due to the real-time requirement, EMC has its own 'distro'.  
EMC is feature rich, under active development, and looking for more developers.
</PRE>