From: Bob Blick <bobblick@outlook.com>
To: Microcontroller discussion list - Public. <piclist@mit.edu>
Sender: "piclist-bounces@mit.edu" <piclist-bounces@mit.edu>
Date: Tue, 28 Apr 2020 11:34:54 -0700
Subject: Re: [EE] Voltage regulator with high input voltage
Thread-Topic: [EE] Voltage regulator with high input voltage
Thread-Index: AQHWHLo9HSfcq5jP60isdEF0EvoMy6iOvp/hgAAQg4CAAAbSAIAABwnM
Message-ID:
 <BYAPR02MB4055A01CB2D095F5CFFFFCB5DCAC0@BYAPR02MB4055.namprd02.prod.outlook.com>
References:
 <CAFo_nNp2c_0B6MP+Nv9OJBwjbo5QokUdgM8xL4zgSZAeYSXbOw@mail.gmail.com>
	<BYAPR02MB405576633F1229C364CFEF9BDCAC0@BYAPR02MB4055.namprd02.prod.outlook.com>
	<CAFo_nNqPQA21sVN2E9YXsYWLc6JhRBHN-Zmg_HH3O8-iOwCggQ@mail.gmail.com>,
	<1037003119.1143893.1588097174180@mail.yahoo.com>
In-Reply-To: <1037003119.1143893.1588097174180@mail.yahoo.com>
Reply-To: Microcontroller discussion list - Public. <piclist@mit.edu>
Accept-Language: en-US
Content-Language: en-US
X-MS-Exchange-Organization-SenderIdResult: Pass
X-MS-Exchange-Organization-PRD: mit.edu
X-MS-TNEF-Correlator:
acceptlanguage: en-US
received-spf: Pass (protection.outlook.com: domain of outlook.com designates
	40.92.10.18 as permitted sender) receiver=protection.outlook.com;
	client-ip=40.92.10.18;	helo=NAM04-CO1-obe.outbound.protection.outlook.com; 
dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=outlook.com;
	s=selector1;
	h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck;
	bh=/+cCyNRmGjTRTgIuhP+fP9/e9mb8pT8aaSK0w6W+7/s=;
	b=nZ2J4R4MgVqfFZhasxW4zVu5eqMywHocR41JO0EFZBKBOwZbXJS7xxcidcjxmEwkP2/X8P1S1zGEQESRRLV3T+Lz7lKx966ajzgmkdnCy/cn4gmEQJQ9Bwf01SCcDc5hfRBVqihbz7mdupl0fdIo/4LcdjWvQvBaWFMJGaSRAW9zrne0dgIByJaHU0LEtFJsddSdfrsPJLSBccsc0HgnzGw29jGtc6ON2CXS5Lbq404jxE7MAu1oUlbWkCLXRJUCP1llh9dL1hiC8btmcpM7Qzwlw7BLASw+W++DgFz0hBJdLWGJUYjhrCDx8oNPLey75btAHYXl0UOFKYdxzngj1A==
authentication-results: spf=pass (sender IP is 40.92.10.18)
	smtp.mailfrom=outlook.com; mit.edu; dkim=pass (signature was verified)
	header.d=outlook.com;mit.edu; dmarc=pass action=none
	header.from=outlook.com;compauth=pass reason=100
errors-to: piclist-bounces@mit.edu
list-id: "Microcontroller discussion list - Public." <piclist.mit.edu>
list-post: <mailto:piclist@mit.edu>
x-beenthere: piclist@mit.edu
x-mailman-version: 2.1.6
x-topics: [EE]
x-mime-autoconverted: from quoted-printable to 8bit by PCH.mit.edu id
	03SIZFVI001901
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0

That's a cool little(tiny!) part. I like that it runs in PFM mode, keeps th=
e current drain way down when it's idling.

Cheers, Bob

________________________________________
From: piclist-bounces@mit.edu <piclist-bounces@mit.edu> on behalf of Jean-P=
aul Louis <louijp@yahoo.com>
Sent: Tuesday, April 28, 2020 11:06 AM
To: Microcontroller discussion list - Public.
Subject: Re: [EE] Voltage regulator with high input voltage

That's the type of part I was talking about.

http://www.ti.com/lit/pdf/snvsbf6


Jean-Paul N1JPL

Sent from Yahoo Mail on Android

  On Tue, Apr 28, 2020 at 1:42 PM, David C Brown<dcb.home@gmail.com> wrote:=
   Hi Bob

I had already reached the conclusion that the LMetc is the engineering
solution.  For a one off project the cost of a few pounds is not
significant and it speeds up the job
__________________________________________
David C Brown
43 Bings Road
Whaley Bridge
High Peak                          Phone: 01663 733236
Derbyshire                eMail: dcb.home@gmail.com
SK23 7ND          web: www.bings-knowle.co.uk/dcb
<http://www.jb.man.ac.uk/~dcb>



*Sent from my etch-a-sketch*


On Tue, 28 Apr 2020 at 17:50, Bob Blick <bobblick@outlook.com> wrote:

> Hi David,
>
> I second the suggestion of an LM2576HV. Even though it's a relatively
> expensive part, it'll be simple to build something from it and you won't
> need to spend much time getting it to work. Also, it's a tried-and-true
> part and is designed to be tough and dependable. You can trust that it wi=
ll
> actually give you 5 volts under all situations.
>
> Friendly regards, Bob
>
> ________________________________________
> From: piclist-bounces@mit.edu <piclist-bounces@mit.edu> on behalf of
> David C Brown
> Sent: Monday, April 27, 2020 10:24 AM
> To: Microcontroller discussion list - Public.
> Subject: [EE] Voltage regulator with high input voltage
>
> I am designing a current monitor for my e-bike.  Using an INA169 hi side
> current senor into a mid range PIC with a two digit LED display.
>
> Problem is getting the 5 volts for the PIC from the e bike battery which =
is
> nominally 36v but can rise to over 40 volts when fully charged.  Most sma=
ll
> linear regulators seem to be rated at 36v..
>
> Current would be a couple of milliamps with the display off (most of the
> time).  Nearer 100 with the display on..
>
> Any suggestions
>
>
>
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.