From: Bob Blick <bobblick@outlook.com>
To: Microcontroller discussion list - Public. <piclist@mit.edu>
Sender: "piclist-bounces@mit.edu" <piclist-bounces@mit.edu>
Date: Fri, 17 Jan 2020 13:07:02 -0800
Subject: Re: [CAUTION: Failed DKIM Test]Re: [EE]:: What do you wish you	had
	known before you started with	Electronics.
Thread-Topic: [CAUTION: Failed DKIM Test]Re: [EE]:: What do you wish you	had
	known before you started with	Electronics.
Thread-Index: AQHVzXlU4qwgnKM4U0CQUj7jC2oft6fvWDkR
Message-ID:
 <SN6PR02MB4064C2BC8B586759B15D04E4DC310@SN6PR02MB4064.namprd02.prod.outlook.com>
References:
 <CACZQxzPFO-HASiqTfschNsbwqftMeQvN4g-rUfiGiL4RsctFTg@mail.gmail.com>,
	<CAGazNuWubwX+G7UsTsRmu+33-ADR_921ObZXJ_TFyqx9e1Uu5g@mail.gmail.com>
	<SN6PR02MB40647109FCE301F29DC772CCDC310@SN6PR02MB4064.namprd02.prod.outlook.com>,
	<009301d5cd5f$3feb9a90$bfc2cfb0$@amulvey.com>
	<SN6PR02MB40640C3D2931C76B881FBFE9DC310@SN6PR02MB4064.namprd02.prod.outlook.com>,
	<003701d5cd77$98095b50$c81c11f0$@amulvey.com>
In-Reply-To: <003701d5cd77$98095b50$c81c11f0$@amulvey.com>
Reply-To: Microcontroller discussion list - Public. <piclist@mit.edu>
Accept-Language: en-US
Content-Language: en-US
X-MS-Exchange-Organization-SenderIdResult: Pass
X-MS-Exchange-Organization-PRD: mit.edu
X-MS-TNEF-Correlator:
acceptlanguage: en-US
received-spf: Pass (protection.outlook.com: domain of outlook.com designates
	40.92.3.23 as permitted sender) receiver=protection.outlook.com;
	client-ip=40.92.3.23; helo=NAM02-BL2-obe.outbound.protection.outlook.com;
dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=outlook.com;
	s=selector1;
	h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck;
	bh=UBSt8Kn6T/6z/Czi1eLAMTXIoe9g3Bs93NkjMvs4bh8=;
	b=gF5bRJUrV2kyqcJaRyILXqlEk+zcKzXmYrUxDHaFLFp8PYz49iDYCma6xetRNpX95LIy1G4q9te2l6v3TuYBNlno+5QjCOn0aRPaQTwCDGJy0e6TBqFLBKfv+e4FutRny2j0U13Uvc/NI0JKD/yDW6uW4jFgRp/f00K9Gulo1yYceuV65mBqRPh5WV+0T5mpo5f1xqlHPY9fNUSEUsnhr7UI03xonEtB+bmKa/spWHve5yVMqsD5I4Wg55y6cx6DlzsrDgJJIMGpslXwDlo33hVBNx72SfLCJixMz/pPtGOJo1IXNCEOtWpgzCWqyC6yBj0aP3zoL7jTgpuA5m+ewQ==
authentication-results: spf=pass (sender IP is 40.92.3.23)
	smtp.mailfrom=outlook.com; mit.edu; dkim=pass (signature was verified)
	header.d=outlook.com;mit.edu; dmarc=pass action=none
	header.from=outlook.com;compauth=pass reason=100
errors-to: piclist-bounces@mit.edu
list-id: "Microcontroller discussion list - Public." <piclist.mit.edu>
list-post: <mailto:piclist@mit.edu>
x-beenthere: piclist@mit.edu
x-mailman-version: 2.1.6
x-topics: [EE]
x-mime-autoconverted: from quoted-printable to 8bit by PCH.mit.edu id
	00HL7obI001769
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0

No, it smells like solvent and dries much faster than silicone.
Bob

________________________________________
From: piclist-bounces@mit.edu <piclist-bounces@mit.edu> on behalf of Allen =
Mulvey
Sent: Friday, January 17, 2020 12:49 PM
To: 'Microcontroller discussion list - Public.'
Subject: RE: [CAUTION: Failed DKIM Test]Re: [EE]:: What do you wish you had=
     known before you started with   Electronics.

Very interesting. I'm pretty sure I got all of mine from
Walmart in blister packs. Does yours resemble silicone
rubber at all?

Allen

-----Original Message-----
From: piclist-bounces@mit.edu
[mailto:piclist-bounces@mit.edu] On Behalf Of Bob Blick
Sent: Friday, January 17, 2020 1:31 PM
To: Microcontroller discussion list - Public.
Subject: Re: [CAUTION: Failed DKIM Test]Re: [EE]:: What do
you wish you had known before you started with Electronics.

That's weird. It has always been clear and solvent-based.
Maybe counterfeit? I have an artist friend who buys it by
the case and never heard of any irregularities. He gives me
his almost-empty tubes since he likes a full tube when he
starts "painting".

Bob

________________________________________
From: piclist-bounces@mit.edu <piclist-bounces@mit.edu> on
behalf of Allen Mulvey
Sent: Friday, January 17, 2020 9:55 AM
To: 'Microcontroller discussion list - Public.'
Subject: RE: [CAUTION: Failed DKIM Test]Re: [EE]:: What do
you wish you had     known before you started with
Electronics.

I had been using the E6000 for the past several years but
the last time I bought some it was obviously very different.
The original was white and got translucent when cured. The
new stuff looks suspiciously like silicone rubber.

Allen

-----Original Message-----
From: piclist-bounces@mit.edu
[mailto:piclist-bounces@mit.edu] On Behalf Of Bob Blick
Sent: Friday, January 17, 2020 12:10 PM
To: Microcontroller discussion list - Public.
Subject: [CAUTION: Failed DKIM Test]Re: [EE]:: What do you
wish you had known before you started with Electronics.


Hi Ryan,

These two work well for me. They are similar-smelling
solvent-based adhesives but the E6000 is much thicker,
self-levels but doesn't really move from where you put it.
It's at hardware or craft stores, sometimes with the name
"GOOP". The Fix-All is runnier, sort of like flexible model
glue, but doesn't creep too much unless you lay on a lot of
it. I find it at the dollar store. Also useful for gluing
new surrounds on woofers.

http://eclecticproducts.com/products/e6000/

https://supergluecorp.com/product/fix-all-adhesive/

Cheerful regards, Bob

________________________________________
From: piclist-bounces@mit.edu <piclist-bounces@mit.edu> on
behalf of Ryan O'Connor
Sent: Thursday, January 16, 2020 5:20 PM
To: Microcontroller discussion list - Public.
Subject: Re: [EE]:: What do you wish you had known before
you started with      Electronics.

While I'm here, what products are recommended to stick
vibrating
through-hole capacitors to stuff if hot glue and silicone
rubber are
no-go's?

Ryan


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.