AD1PCFG bit 14 (PCFG14)  Is 0   This register isn't supposed to affect this=
 pin as it's not an analog input, and I did try setting it to 1, no help.

I2C1CON bit 15 (ON) Is 0

OSCCON bits 20-19 is all 0's.   (PBCLK divisor - there are several notes ab=
out a 1:1
ratio requiring additional conditions).   I'm assuming this is still the
divided by 8 from the fuses, but could have been overwritten.

What does the same code do if ran in the simulator?  No idea, I haven't eve=
r used the sim yet.

Have you gotten a meter out and measured the actual voltage on the actual p=
in?   Yup, it's low. Almost 0.00.

--
David VanHorn
Lead Hardware Engineer

Backcountry Access, Inc.
2820 Wilderness Pl, Unit H
Boulder, CO =A080301 USA
phone:=A0303-417-1345 =A0x110
email:=A0david.vanhorn@backcountryaccess.com=A0


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.