Hi there, Mark.

I haven't used that module yet, so I may be completely off the=20
mark.  But: don't you have to enable the module before you can configure it=
?

Just a wild-assed guess.

dwayne


At 10:39 AM 2/26/2019, Mark E. Skeels wrote:
>Content-Transfer-Encoding: base64Hello fellow PICers,
>
>Don't know what I'm doing wrong;I've set up the LCD on this part and
>tried to start the LCD module but it never starts and
>bit LCDA of LCDPS stays low.
>
>I xor'ed a port in main to verify the PIC is running.
>
>
>SO no activity on the segment or common outputs. As near as I can tell
>all the other registers seem correct.
>I'd very much appreciate it if someone could take a look at my code or
>suggest things I forgot or did wrong.
>
>Here's my initialization code for the LCD:

<giant snip>

>***
>finally, I turn on the module:
>void LCD_Enable (void)
>{
>      LCDCONbits.LCDEN =3D 1;
>}
>
>
>What am I missing?
>Thanks,
>Mark


--=20
Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
780-489-3199 voice   780-487-6397 fax   888-489-3199 Toll Free
www.trinity-electronics.com
Custom Electronics Design and Manufacturing

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.